Everbuild 405 Path & Patio Seal – 25 Litre

Uses

The Everbuild 405 Path & Patio Seal offers long-lasting protection for your external flooring. Everbuild concocted the 405's formula to deliver excellent protection to various surfaces, such as;

• Patios
• Paths
• Natural Stone
• Concrete
• Block Paving

Its unique formula provides a milky solution which dries into a low-sheen, slip-resistant finish. It has a powerful protection which prevents various contaminants such as;

• Sunlight damage
• Water
• Oil
• Petrol
• Organic Growth

Preparation

The surface must be free from dirt, dust, oil, grease, algae, loose materials, organic growth, etc. Clean the surface with a dedicated cleaner, and for bad oil stains, use a proprietary detergent. Very soiled surfaces should be cleaned as well with a dedicated cleaner.

After cleaning the surface, wash it down with a hose and broom, ensuring that you remove all traces of the cleaning products. Pavers must be left for three months minimum after placing before over-coating, or the salts inside won't leach out and will sit underneath the sealer and create unsightly white patches, especially during wet conditions.

Applications

1. Stir well before use.
2. Apply using a long-pile roller and tray or low-pressure spray.
3. Apply in even, thorough coats, especially on textured areas where ponding could occur but must be avoided.
4. Apply two coats, allowing 2 hours between coats. Optionally, a 3rd coat can be applied to offer a semi-gloss finish, which should be completed 4 hours after the last coat.

Limitations

• Do not use on surfaces treated with silicone or stearate-based water seals unless the surface is weathered enough to show no water-beading effects.
• Do not use if rain is imminent or (within 5 hours at 20°C)
• This product should not be applied if the air and surface temperature is below 5°C.
• Dispose of this product accordingly; do not allow it to enter watercourses.