Everbuild 405 Path & Patio Seal – 5 Litre

Uses

The Everbuild 405 Path & Patio Seal – 5 Litre offers long-lasting protection for your external flooring. Everbuild concocted the 405's formula to deliver excellent protection to various surfaces, such as;

• Patios
• Paths
• Natural Stone
• Concrete
• Block Paving

Its unique formula provides a milky solution which dries into a low-sheen, slip-resistant finish. It has a powerful protection which prevents various contaminants such as;

• Sunlight damage
• Water
• Oil
• Petrol
• Organic Growth

Preparation

Remove all dirt, dust, oil, grease, algae, loose materials, and organic growth from the surface. Use a dedicated cleaner to clean the surface thoroughly. For heavy oil stains, apply a proprietary detergent. Clean very soiled areas with the same dedicated cleaner.

After cleaning, rinse the surface thoroughly using a hose and broom. Make sure to remove all traces of the cleaning products. Wait at least three months after placing the pavers before applying any coating. This waiting period allows the salts to leach out; otherwise, they will remain trapped under the sealer and cause unsightly white patches, especially in wet conditions.

Applications

1. Stir well before use.
2. Apply using a long-pile roller and tray or low-pressure spray.
3. Apply in even, thorough coats, especially on textured areas where bonding could occur but must be avoided.
4. Apply two coats, allowing 2 hours between coats. Optionally, a 3rd coat can be applied to offer a semi-gloss finish, which should be completed 4 hours after the last coat.

Limitations

• Do not use on surfaces treated with silicone or stearate-based water seals unless the surface is weathered enough to show no water-beading effects.
• Do not use if rain is imminent or within 5 hours (at 20°C)
• This product should not be applied if the air and surface temperature is below 5°C.
• Dispose of this product accordingly; do not allow it to enter watercourses.