Soudal Brake Cleaner - 400ml 
Freeflow 65mm Square Down Pipe Clip Standard - White 
Double Nylon Tool Pouch with Belt 
Klober Regent Tile Vent KG6084, Grey 
Ronseal Exterior Yacht Varnish - Satin 500ml 
BORA Centipede 2ft x 4ft x 30in Unit - 4 X-Cups + 2 Clamp + C/S Bag 
Ronseal Stays White 2in1 Paint & Primer - Matt 750ml 
Ronseal One Coat Stain Block - White 2.5L 
Soudal Construction Silicone, Grey - 290ml 
Everbuild Black Jack 905 All Weather Roof Coating – 5 Litre 
Ox Tools OX Pro Heavy Duty Sealant Gun - 290ml to 400ml 
Bond It Rubber Bitumen Emulsion - Black 2.5L 
ALM Code 5 Milled Lead - 300mm x 3m 
OX Pro Magnetic Level 600mm 
EVO-STIK Stick Like Sh*t - White 290ml 
ALM Code 7 Milled Lead - 1600mm x 3m 
Soudal Superglue Activator - 200ml 
OX Pro Jab Saw - 6.5" / 165mm & Holster Pack 
Everbuild Everflex Premium+ 500 Bath & Sanitary Silicone - Clear 295ml (Box of 25) 
Gorilla Tape - Black (48mm x 32m) 
Timco 25 Spanner Set 
Bond It Contractors Grade PVA - White 500ml 
Uses
Bond It Bituminous paint is crafted to deliver waterproofing and overall weather protection for various surfaces, it provides an odourless and taint-free film which defends against corrosion and decay. Surfaces that are suitable for this product include;
- Steelwork
- Concrete
- Ferrous and non-ferrous metals
- Felt
- Fibre cement
- Corrugated iron
- Asphalt
- Wood
Preparation
Surfaces must be prepared before you can start application, remove any contaminants that can interfere with the bituminous paint, such as oil, dust, grease or similar impurities. Any organic growth that is present should be removed MOULD STOP as it's effective and killing and prevents further growth for months. Rust must be removed with a wire brush and treated with rust inhibitor primer.
Once you've treated the surface and given the appropriate remedial work, ensure there is no water on the surface as it can interfere with the bituminous paint.
Application
This product is supplied ready to use and shouldn't require any thinning.
- Apply using a brush, roller or spray
- Apply at least two coats giving 6 hours between each coat.
Limitations
It is not suitable to use this product when;
- In areas where solvent contact is likely
- Use for potable drinking water tanks.
- Bitumen paint can bleed through any paint applied on top of it; it is suggested that you use a primer recommended by the paint manufacturer before applying any paint on top.
