OX Pro Chalk Refill, White – 226g 
Everbuild Mitre Fast Industrial Kit Superglue (Box of 24) 
Code 6 Cast Lead - 1200mm x 3m 
Left Hand Klober Contract Dry Verge Unit Grey 
Gorilla Wood Glue - Brown 532ml 
Thompson's One Coat Damp Seal - White 250ml 
Bond It Duct Tape - Black 48mm x 45M 
ALM Code 5 Milled Lead - 850mm x 6m 
Everbuild Everflex Contract 125 One Hour Caulk – White 380ml 
Everbuild Superflow Sealant Gun - C3 (290ml - 310ml) 
Cavity Wall Weep Extension 
Code 3 Cast Lead - 240mm x 6m 
Timco FirmaHold Collated Clipped Head Nails - Gun Nails (3.1mm x 90mm) 
Ronseal Stays White 2in1 Paint & Primer - Gloss 2.5L 
Freeflow 68mm Round Gutter Drain Pipe 112° Branch - White 
Everbuild Stick2 Carpet Fix Spray - 500ml 
OB41 White Grease Spray - 400ml 
Timloc Felt Support Tray 600mm 
ALM Code 3 Milled Lead - 800mm x 6m 
Soudal Repair Express Plaster - White 250ml 
Bond It Heavy Duty Gun Foam Applicator 
Uses
This one-part polyurethane adhesive and sealant is resistant to water, most chemicals and oil and so can be used for sealing and bonding in engineering, construction, automotive and marine applications.
It can be applied effectively to a variety of different surfaces such as:
- Wood
- Metal
- GRP
- Glass
- Rubbers
- Ceramic
- Concrete
- Mortar
- PVC
Preparation
Prior to application, ensure surfaces are free from contaminants (dirt, dust and grease etc) that may hinder the adhesion.
Application
- Apply using a standard sealant gun
- Cut the top of the cartridge without damaging the threaded screw
- Apply the nozzle onto the threaded screw
- Cut the nozzle at a 45° angle, ensuring the gap is slightly smaller than the area to be filled
- Smooth down with a soapy sealant tool within 10 minutes of application
Tools used should be cleaned after using acetone. If sealant has already cured, the product should be removed by abrasion
You can paint on top of this sealant with water-based paints, however if using a solvent based paint you should test a small inconspicuous area to determine suitability
Limitations
- This sealant should not be used for aquarium construction
- Do not use with bitumen or asphalt.
- Not suitable for joins with a movement more significant than 15%
- Discolouration may occur with grey and white shades if exposed to UV.
