Bond It S3 Sanitary Silicone - EU3

Uses

This S3 Sanitary Silicone is excellent adhesion to ceramics, glass, melamine laminates and sanitary plastics, making it perfect for application in bathrooms and kitchens. Its unique formula enables it to be applied in damp and humid areas delivering resistant properties preventing unsightly mould growth.

The S3 Silicone does offer another level of performance when it comes to silicone sealants, it's ideal for application on;

• Glass
• Ceramics
• Anodised aluminium
• Lacquered and primed metals
• Painted timber
• Plaster
• Sanitary plastics
• Primed and painted concrete

Preparation

Prepare the surface before starting the application; complete this by ensuring all surfaces are clean, dry and free from grease or similar contaminants that can hinder adhesion.

Application

1. Apply using a standard sealant gun
2. Cut the top of the cartridge, be careful not to cut the threaded screw
3. Screw the nozzle onto the cartridge
4. Cut it at a 45° angle, making the hole slightly larger than the gap

For Bath Surrounds: Fill half of the bathtub with water, enabling the sealant to be applied at the midpoint. If significant gaps are present, use a polythene foam, rod or tape to support the sealant and prevent wastage.

For sealing waste outlets in sinks and baths: Apply the S3 Silicone so it is compressed after connecting and tightening the pipes.

For metallised plastic trims: Discolouration may occur; carry out a test before in an inconspicuous area.

Limitations

Before applying this product on bare metal or fresh concrete, apply a primer beforehand. If you use this product for natural stone, especially marble, you must apply a primer or sealer. This product isn't suitable for mirrors.