Everbuild 501 PVA - 1 Litre 
Code 5 Cast Lead - 800mm x 3m 
Bostik Flashband Self Adhesive Flashing Tape – Grey 3.75m x 75mm 
Bondit Monster Mesh Pink 50m x 1m - 160g/m2 
ALM Code 5 Milled Lead - 390mm x 6m 
ALM Code 6 Milled Lead Flashing - 1600mm x 6m 
Timco Classic Pozi Multi-Purpose Screws - Mixed Tray 
ALM Code 3 Milled Lead - 600mm x 6m 
Klober Single Pantile Vent - Brown KG9860-0247 (Box of 10) 
Ronseal One Coat Water-Based Tile Paint - White Gloss 750ml 
Soudal Roof & Gutter Sealant – Black 290ml 
Code 6 Cast Lead - 450mm x 3m 
Soudal Silicone Sealant Remover, Clear - 100ml 
Code 7 Cast Lead - 1600mm x 3m 
Bond It Monster Water Resistant Tape - 48mm x 11m (Black) 
Soudal Gap Filler Expanding Foam Genius Gun 300ml - Champagne (Box of 12) 
Ronseal Stays White 2in1 Paint & Primer - Matt 750ml 
ALM Code 4 Milled Lead - 914mm x 6m 
Ronseal One Coat Damp Seal - White 750ml 
This superglue activator by Bond It excels at speeding up the adhesion time of cyanoacrylate adhesives, with its activater able to speed strength development to enable immediate use. It is best used in conjunction with Bond It adhesive HCV1620/ 50 and RGC2420/ 50, it can help improve the bonding to certain surfaces that before may have been struggling to connect.
This product can cause staining if used accessively and should be used with care, it's best to test the product first in an inconspicuous area. Typically this product can stain surfaces like uPVC; however, if used correctly, it won't cause any of these issues on any surface. Please note that the staining can take several hours to show.
Application
Before application, prepare the surfaces ensuring they are clean, dry and free from dust, grease, oil and other contaminants that can hinder adhesion.
- Apply the adhesive to the area
- Spray the superglue activator onto the adhesive
- Connect the two surfaces.
