Bond It Contractors Grade PVA White 500ml - Box of 20 
Bond It Cover-It Carpet Protector - Clear 625mm X 25M 
Code 5 Cast Lead - 510mm x 3m 
Klober Profile-Line Flat Tile Vent - Slate Grey KG9856-3-0429 (Box of 10) 
FloPlast Half Round Downpipe 112° Bend, White 
Timco Aluminium Hawk 
ALM Code 7 Milled Lead - 1200mm x 3m 
FloPlast Square Union Unit - Black 
Bond It B3 Fill And Fix Expanding Foam Gun Grade - Beige 750ml 
Timco Heavy Duty Tarpaulin - 4m x 5m 
Soudal Genius Gun Building Adhesive 750ml - Champagne (Box of 12) 
OX Pro 7 Piece Screwdriver Set 
Samac Aluminium Annular Ring Nails - 1kg (70mm x 3.35mm) 
Everbuild External Frame Sealant - Brown 290ml (Box of 12) 
Soudal Mitre Kit 50g + 200ml - Clear 
Easy-Trim End Cap Angled - Black (Box of 10) 
ALM Code 3 Milled Lead - 1200mm x 6m 
Everbuild Lumberjack 5 Minute PU Wood Adhesive Gel – 310ml 
OX Tools OXIT Sealant & Adhesive - Anthracite 290ml (Box of 12) 
Ronseal Multi Purpose Filler Smooth Finish Powder - 2Kg 
Bond It Decking Oil - Natural 2.5L 
Uses
The Aluminium Solar Reflective Paint by Bond is an excellent solution to combating solar heat, light, and the degradation and heat gain caused by it. This paint is forged using a thin, bituminous-based aluminium coating of brushing consistency that dries into a silvery finish. It's ideal for application onto roof spaces, it can also be applied directly over other bituminious coatings, sealing primers, paints, or similar products.
Preparation
Ensure the surface is structurally sound and free from contaminants that can hinder the adhesion, including dirt, dust, grease, oil, etc. Any organic growth must be removed, which is best achieved using a fungicide. Some weathered surfaces may require a bitumen primer to be applied prior to ensuring optimal bonding.
Application
- Stir the product very thoroughly before using it.
- Do not thin the paint; apply immediately and continue stirring it throughout the application.
- Apply to the surface using a brush or pile roller, taking care not to apply too thin of a coat.
- Allow a sufficient amount of time to dry before applying a second coat, which can take up to 1 hour.
Limitations and Notes
- When applying the solar reflective paint on a bitumen surface, you must allow;
- Hot Applied Coating - 24 Hours
- Solvent-Based Coating - 10 Days
- Water-Based Coating - 14 Days
