ALM Code 7 Milled Lead - 390mm x 6m 
Gorilla Wood Glue - Brown 236ml 
D4 Wood Adhesive – 1 Litre 
Code 8 Cast Lead - 240mm x 3m 
Soudal Adhesive Remover - 400ml 
Ronseal uPVC Paint - Black Satin 2.5L 
Soudal Butyrub Non-Setting Mastic - Grey 300ml (Box of 12) 
Isoflex Special Primer - 750ml 
Timco 25 Spanner Set 
Everbuild EB25 Ultimate Sealant & Adhesive – Clear 300ml (Box of 12) 
Everbuild Silicone Spray - 400ml (Box of 12) 
FloPlast Half Round Pipe Socket, Brown 
ALM Code 3 Milled Lead - 180mm x 6m 
Everbuild Lumberjack 550 Floor Adhesive – 600ml (Box of 12) 
Easy-Trim Universal Dry Verge Unit - Black 
Code 5 Cast Lead - 800mm x 6m 
Ronseal 6 Year Anti Mould Paint - White Matt 2.5L 
Premium Flashpoint Lead Sealant - Grey 
Oxidised Bitumen Slab - 23kg 
Everflex Premium+ 450 Builders Silicone – Grey 300ml (Box of 25) 
Cromar ProRidge Universal Ridge System 3m Kit 
Bond It B1 Fire Resistant PU Aerosol Expanding Foam - Pink 750ml 
Uses
Bond It Bituminous paint is crafted to deliver waterproofing and overall weather protection for various surfaces, it provides an odourless and taint-free film which defends against corrosion and decay. Surfaces that are suitable for this product include;
- Steelwork
- Concrete
- Ferrous and non-ferrous metals
- Felt
- Fibre cement
- Corrugated iron
- Asphalt
- Wood
Preparation
Surfaces must be prepared before you can start application, remove any contaminants that can interfere with the bituminous paint, such as oil, dust, grease or similar impurities. Any organic growth that is present should be removed MOULD STOP as it's effective and killing and prevents further growth for months. Rust must be removed with a wire brush and treated with rust inhibitor primer.
Once you've treated the surface and given the appropriate remedial work, ensure there is no water on the surface as it can interfere with the bituminous paint.
Application
This product is supplied ready to use and shouldn't require any thinning.
- Apply using a brush, roller or spray
- Apply at least two coats giving 6 hours between each coat.
Limitations
It is not suitable to use this product when;
- In areas where solvent contact is likely
- Use for potable drinking water tanks.
- Bitumen paint can bleed through any paint applied on top of it; it is suggested that you use a primer recommended by the paint manufacturer before applying any paint on top.
