FloPlast Square to Round Downpipe Adaptor - Brown 
Everbuild Carpet Fix Cloth Tape – 50mm x 25m 
OX Pro Brick Trowel Philadelphia Pattern - 10"/250mm 
Gorilla Contact Adhesive Tube - Clear 75g 
Bond It A43 Threadlock Oil Tolerant Adhesive - 50ml Blue 
Timco Square Twist Nails - Galvanised (40 x 3.75mm) 1kg 
Everbuild Everflex 115 G.P Building Mastic - Stone 285ml (Box of 25) 
Easy-Trim Universal Dry Verge System Terracotta (Box of 50) 
FrogTape® Delicate Surface Masking Tape - Yellow 24mm x 41.1m 
Code 7 Cast Lead - 300mm x 3m 
Leadax Lead Free Flashing Alternative 300mm (6M Rolls) 
Code 5 Cast Lead - 1000mm x 3m 
OB41 Multi-Use Penetrating Oil Spray - 400ml 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Black (Box of 5) 
OX Pro Small Trowel - 200 x 75mm 
Klober Permo Ecovent - 1.1m x 50m 
ALM Code 5 Milled Lead - 240mm x 3m 
Code 3 Cast Lead - 450mm x 3m 
OX Trade Stubby Level - 100mm 
Youngman Double Section Roof Ladder 4.89m (57664600) 
Stanley Heavy-Duty Scraper - 75mm 
Bond It Silicone Ultra Waterseal - Clear 5L 
Uses
The Bond It Bitumen Primer is an excellent primer that provides a key for subsequent bituminous coatings. It is ideal for those dealing with challenging substrates that won't naturally accept bituminous products. All you need to do is apply this primer before, allow it to dry, and then proceed with your application, repairing, sealing, treating, and generally improving the surface. This product's versatility is unmatched, providing keys to challenging substrates such as;
- Bitumen felt
- Mastic asphalt
- Weathered corrugated iron and steel
- Fibre cement
Preparation
To achieve optimal adhesive results with the bitumen primer, clean the surface and remove contaminants, including dirt, dust, grease, oil, organic growth, loose debris, etc. If the surface is suffering from a lot of organic growth, use a fungicide to eradicate it, and any rusting surface should be treated with a rust inhibitor.
Application
- Apply via brush or pile roller
- Apply a thin coat of bitumen primer, taking care not to cause any pooling
- Any area to be waterproofed should have the coat applied at least 75mm wide around it for secure sealing
- Leave to dry fully for at least 2 - 3 hours
