Code 3 Cast Lead - 240mm x 3m 
Roughneck® V-Series Axe - 20oz/0.6kg 
Everbuild Heat Mate Silicone Sealant - Red 295ml (Box of 12) 
Everbuild Flexible Decorators Filler – 290ml (Box of 12) 
Everbuild Forever White Silicone Sealant – 295ml (Box of 12) 
Everbuild Stick2 Hard Plastic Adhesive - 30ml 
Everbuild Stick2 Industrial Superglue GP - Transparent 50g 
Timloc 1204 Underfloor Vent Vertical Extension + 150mm 
Hambleside Danelaw (HD TVA) Tile Vent Adaptor for TV15 Range 
Hambleside Danelaw CON6+ Dry Ridge 6m Kit 
Armatool 30m Longo Chalk Line 
Everbuild Stixall Extreme Power – White 290ml 
Bond It Contractors Grade PVA 500ml - Box of 20 
Everbuild Febond PVA - 1L 
Easy-Trim Lead R Flashing Smooth – 600mm x 5m 
Restec GRPROOF 1010 Base Coat Resin - 20kg 
Everbuild Black Jack 901 Black Bitumen Paint – 5 Litre 
Code 7 Cast Lead - 150mm x 3m 
ALM Code 3 Milled Lead - 210mm x 6m 
Thompson's One Coat Damp Seal - White 250ml 
FloPlast Half Round External Stop End, Brown – 112mm 
Ronseal One Coat Water-Based Tile Paint - Black Satin 750ml 
Bond It 5 Minute PU Wood Gel - Translucent 300ml 
Formulated with reliability and performance in mind, the Bond It Felt Adhesive 25L is the go-to choice for tradesmen and D.I.Y enthusiasts. The black colour of the paint delivers a discreet, professional finish with a robust and long-lasting bond that can withstand a variety of weather conditions.
Preparation
All surfaces must be clean and dry. They must be free from grease, oil and loose material. Ensure to remove any organic growth using a fungicidal wash like MOULD STOP. Dusty and porous surfaces should be primed with BITUMEN PRIMER. If possible, the felt to be laid should be cut to size and positioned for 24 hours to assist with the application. To avoid thickening in cold weather, store the FELT ADHESIVE overnight in a warm room before use.
Application
- Use a brush, mop or squeegee when applying this product
- Apply it directly to the surface to be bonded
- Take note that coverage depends on how thick it's applied to the surface
