Ronseal One Coat Wood Primer & Undercoat - White 750ml 
Evo-Stik Gripfill Gap Filling Adhesive – 350ml 
Klober Boll Roll Tile Vent KG6085, Brown 
Spax Magnetic Bit Holder - 1 Piece 
Kwik Flash Lead Tool - Turn In Setting Tool For Lead & Zinc Flashing 
Bond It Organic Cleaner - Clear 2.5L 
Everbuild Lead Mate Patination Oil – 500ml 
Everbuild General Purpose Silicone - Black 290ml (Box of 12) 
Everbuild Pinkgrip Adhesive Solvent Based – 350ml 
Bond It Contractors Grade PVA - White 500ml 
ALM Code 8 Milled Lead - 360mm x 3m 
Ronseal Crystal Clear Outdoor Varnish - Matt 250ml 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Black (Box of 5) 
Roughneck® Gorilla Bar Twin Pack - 35cm & 55cm (14in & 22in) 
Bond It AS900 Acoustic Sealant White 900ml - Box of 12 
Formulated with reliability and performance in mind, the Bond It Felt Adhesive 25L is the go-to choice for tradesmen and D.I.Y enthusiasts. The black colour of the paint delivers a discreet, professional finish with a robust and long-lasting bond that can withstand a variety of weather conditions.
Preparation
All surfaces must be clean and dry. They must be free from grease, oil and loose material. Ensure to remove any organic growth using a fungicidal wash like MOULD STOP. Dusty and porous surfaces should be primed with BITUMEN PRIMER. If possible, the felt to be laid should be cut to size and positioned for 24 hours to assist with the application. To avoid thickening in cold weather, store the FELT ADHESIVE overnight in a warm room before use.
Application
- Use a brush, mop or squeegee when applying this product
- Apply it directly to the surface to be bonded
- Take note that coverage depends on how thick it's applied to the surface
