Bond It Felt Adhesive - Black 25L 
FloPlast Half Round Gutter Union, Brown 
Thompson's Emergency Instant Repair Aerosol - Black 450ml 
Code 7 Cast Lead - 360mm x 6m 
Ronseal uPVC Cleaner - 750ml 
Everflex Premium+ 450 Builders Silicone – Black 300ml (Box of 25) 
ALM Code 3 Milled Lead - 600mm x 3m 
FloPlast Square Line Gutter Angle 135° Black 
Timloc Universal Slate Roof Vent Adaptor Only 
ALM Code 8 Milled Lead - 1200mm x 3m 
Siroflex LMN Silicone - Doors & Windows - Black 300ml 
Siroflex Trade Strength Glass Cleaner - 1L 
Oxyturbo Maxy Gas Refill 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Slate Grey (Box of 5) 
Everbuild 403 Concrete Hardener & Dustproofer – 5 Litre 
Ronseal Precision Finish Brush - 1 Inch Angled 
Armatool Leather Pouch & Leather Belt 
Bond It B3 Fill And Fix Expanding Foam Aerosol - Beige 500ml 
Bond It Foil Safe Solvent Cleaner - Clear 1L 
Standard Brush 4-Inch 
OB41 Fast Tack Contact Adhesive Spray - 500ml 
OX Pro Brick Hammer - 24 oz 
Everbuild Flue Jointing Compound - 1kg 
Uses
Powder Filler by Bond It offers outstanding properties for internal domestic use, perfect for various substrates, it has features such as being painted over and drilled into whilst retaining its durable, long-lasting qualities. Once applied onto the wall, this product's reliable adhesive properties prevent it from slumping. It can be sanded down afterwards to offer a smooth flush finish that's perfect for wallpaper to be applied onto.
Preparation
You must prepare the surfaces prior to application; complete this by removing contaminants that can hinder the product's adhesion, including dust and loose materials. You must enlarge the crack slightly to apply a deep repair if the crack is a hairline.
Mixing
You should only mix enough to last around 40 minutes. Mix both the powder filler with water, using the ratio of 2.5 parts filler to 1 part cold clean water, it will mix into a stiff paste, if the crack or hole is deep the mix can be thickened.
Application
- Using a trowel or filling knife
- Scoop the stiff paste and press it firmly into the area
- Fill the gap and smooth it down
- Let it dry and after it's dried, sand down any uneven areas so that it becomes flush
Drying Times
It depends on the environment around, the substrate and the thickness of the filler.
