Everbuild Multi-Use Giant Wonder Wipes Tub (300 Wipes) 
FloPlast Square Line Pipe Branch White – 65mm 
Everbuild Forever Clear Silicone Sealant – 295ml (Box of 12) 
Everbuild 5 Minute Polyurethane Wood Adhesive Gel - 310ml (Box of 12) 
ALM Code 3 Milled Lead - 760mm x 6m 
Everbuild Febond PVA - 5L 
Everflex Contract AC95 Intumescent Sealant & Adhesive - White 900ml (Box of 12) 
ALM Code 8 Milled Lead - 360mm x 6m 
Everbuild Stick2 Hard Plastic Adhesive - 30ml 
EVO-STIK Sticks Like All Weather Adhesive - Clear 290ml 
Freeflow 68mm Round Gutter Drain Pipe 112° Branch - Black 
FloPlast Square Line Gutter 90° Black – 114mm 
ALM Code 7 Milled Lead - 180mm x 6m 
Everbuild KOS Black Fire Cement - 1kg 
Thompson's Oil & Drive Cleaner - 2L 
Ronseal Precision Finish Brush - 1 Inch Angled 
Azpects EASYSeal Sandstone Enhancer and Sealer 5L 
Bond It A43 Threadlock Oil Tolerant Adhesive - 25ml Blue 
ERidge Dry Fix Ridge System Black – 6m Kit 
Gorilla Wood Glue - Brown 1L 
Lead Sheet Restorer - G3 
Ronseal 6 Year Anti Mould Paint - White Matt 2.5L 
Restec GRPROOF 1010 Top Coat Resin - 10kg 
Everbuild Black Jack 901 Black Bitumen Paint – 5 Litre 
Uses
The Rubber Bitumen Emulsion by Bond is excellent and highly effective at providing a damp-proof membrane in sandwich constructions and water protection for floors, walls, and other above-ground structures. It's formed into a bituminous waterproofing compound that can also act as a curing membrane when applied to green concrete. This product can also be an equally effective adhesive for wood blocks, wood mosaic panels, insulation boards, expanding polystyrene, and cork panels.
Preparation
Preparing the surface should be done in accordance with the British Standard 8102 Code of Practice—for the protection of buildings against water from the ground. Besides that, cleaning the surface and removing any contaminants that can hinder this product's adhesion, including dirt, dust, grease, oil, organic growth, etc., should be removed.
Application
- This product should be applied via brush.
- When applying it to damp-proof floors, apply two coats with the second brushed perpendicular to the first, then apply a 50mm sand/cement or concrete screed on top.
- For weatherproofing walls, it depends on how damp they are. If it's extremely damp, hack away to the brickwork and apply three coats of the emulsion to the interior and if you can, exterior as well.
- If they aren't as damp, but damp is present, remove any paint or wallpaper and lightly dampen the wall with water, then apply three coats over. Ensure when applying to internal walls, you allow a 300mm deep horizontal strip along the top of the wall to allow any moisture to escape via evaporation.
