Bond It Monster Scrim Drywall Tape - White 48mm x 90m 
ALM Code 4 Milled Lead - 850mm x 3m 
Soudal Genius Gun Gap Filling and Expanding Foam - 500ml 
Soudal Sealant Remover – 400ml 
FloPlast Half Round Fascia Bracket, White – 112mm 
Timloc Standard Roof Tile Vent Adaptor 
Everbuild Jumbo Mitre Fast Kit (Box of 6) 
Cromar Black Bitumen Paint – 2.5 Litre 
Soudal Pro 40P PU Wood Adhesive - 750g 
Everbuild Overlap & Border Adhesive - White 250g 
Timloc Universal Slate Roof Vent PVC Pipe Only 
ALM Code 7 Milled Lead - 850mm x 3m 
Ronseal Exterior Yacht Varnish - Gloss 250ml 
Bond It PVA & Adhesive Sealer - White 5L 
Soudal Decorators Caulk – White 290ml (Box of 24) 
Hambleside Danelaw Single Pantile Roof Tile Vent, TV10/8 - Antique Red (Box of 5) 
Bond It Bitumen Primer - Black 1L 
Soudal Soudabond 265 Classic Spray - 500ml 
OX Pro Chalk Refill, Red - 226g 
Everbuild 5 Minute Polyurethane Wood Adhesive Gel - 310ml (Box of 12) 
Code 6 Cast Lead - 210mm x 6m 
Bond It Mega Foam Gun/Aerosol PU Expanding Foam - Beige 750ml 
Everbuild Triple Action Wood Treatment – 1 Litre 
ALM Code 8 Milled Lead - 300mm x 6m 
Bond It Aluminium Foil Tape - 50mm x 45M (Box of 24) 
Uses
The Rubber Bitumen Emulsion by Bond is excellent and highly effective at providing a damp-proof membrane in sandwich constructions and water protection for floors, walls, and other above-ground structures. It's formed into a bituminous waterproofing compound that can also act as a curing membrane when applied to green concrete. This product can also be an equally effective adhesive for wood blocks, wood mosaic panels, insulation boards, expanding polystyrene, and cork panels.
Preparation
Preparing the surface should be done in accordance with the British Standard 8102 Code of Practice—for the protection of buildings against water from the ground. Besides that, cleaning the surface and removing any contaminants that can hinder this product's adhesion, including dirt, dust, grease, oil, organic growth, etc., should be removed.
Application
- This product should be applied via brush.
- When applying it to damp-proof floors, apply two coats with the second brushed perpendicular to the first, then apply a 50mm sand/cement or concrete screed on top.
- For weatherproofing walls, it depends on how damp they are. If it's extremely damp, hack away to the brickwork and apply three coats of the emulsion to the interior and if you can, exterior as well.
- If they aren't as damp, but damp is present, remove any paint or wallpaper and lightly dampen the wall with water, then apply three coats over. Ensure when applying to internal walls, you allow a 300mm deep horizontal strip along the top of the wall to allow any moisture to escape via evaporation.
