Freeflow 68mm Round Down Pipe Shoe - White 
Gorilla Super Glue Gel Twin Pack - Clear 3g 
ALM Code 4 Milled Lead - 180mm x 6m 
Ronseal Exterior Yacht Varnish - Gloss 500ml 
ALM Code 3 Milled Lead - 210mm x 6m 
Everbuild Everflex Premium 145 Butyl Rubber Sealant - Grey 300ml 
Roofer Doofer – The Ultimate Roofing Tool 
Timco Pozi C2 Strong-Fix Twin Cut Screws - 4.0mm x 40mm (Box of 200) 
ALM Code 8 Milled Lead - 1600mm x 6m 
Everbuild Febond PVA - 1L 
Bond It Aerosol Spray Adhesive - 500ml Beige 
Code 7 Cast Lead - 1200mm x 6m 
Hambleside Danelaw TV15/7 Tile Vent - Antique Red (Box of 5) 
Samac Aluminium Annular Ring Nails - 1kg (38mm x 3.35mm) 
Bond It Sealant Applicator Tool 
Code 6 Cast Lead - 300mm x 6m 
OX Trade 14 Drive Socket Set - 35 Piece 
Siroflex Trade High Viscosity Superglue - 20g 
Everbuild Bath & Kitchen Sealant - 200ml 
Ronseal Anti-Condensation Paint - Matt White 750ml 
Timloc Plain Tile Vent Terracotta (Box of 14) 
BOND IT Power Mix Concentrated Liquid Mortar Plasticiser - 500ml Brown 
Roughneck® Gorilla Pro-Grip Utility Bar - 376mm/15inch 
OX Pro Pool Trowel, Rigid 450MM / 18" 
Bond It PVCu Solvent Fast Acting Cleaner - Clear 1L 
Uses
The Rubber Bitumen Emulsion by Bond is excellent and highly effective at providing a damp-proof membrane in sandwich constructions and water protection for floors, walls, and other above-ground structures. It's formed into a bituminous waterproofing compound that can also act as a curing membrane when applied to green concrete. This product can also be an equally effective adhesive for wood blocks, wood mosaic panels, insulation boards, expanding polystyrene, and cork panels.
Preparation
Preparing the surface should be done in accordance with the British Standard 8102 Code of Practice—for the protection of buildings against water from the ground. Besides that, cleaning the surface and removing any contaminants that can hinder this product's adhesion, including dirt, dust, grease, oil, organic growth, etc., should be removed.
Application
- This product should be applied via brush.
- When applying it to damp-proof floors, apply two coats with the second brushed perpendicular to the first, then apply a 50mm sand/cement or concrete screed on top.
- For weatherproofing walls, it depends on how damp they are. If it's extremely damp, hack away to the brickwork and apply three coats of the emulsion to the interior and if you can, exterior as well.
- If they aren't as damp, but damp is present, remove any paint or wallpaper and lightly dampen the wall with water, then apply three coats over. Ensure when applying to internal walls, you allow a 300mm deep horizontal strip along the top of the wall to allow any moisture to escape via evaporation.
