ALM Code 6 Milled Lead Flashing - 1600mm x 3m 
Ronseal Garden Paint - Pink Jasmine 750ml 
FloPlast Square Line Internal Stop End White – 114mm 
Ronseal Exterior Yacht Varnish - Gloss 250ml 
Everbuild Aquaseal Liquid Roof – Slate Grey 7kg 
Ronseal Multi Purpose Powder Smooth Finish Filler - 500g + 50% 
Sikabond PVA - White 5 Litre 
FloPlast Half Round Stop End Outlet, Brown – 112mm 
Siroflex Trade Strength Glue Screws SF Adhesive 
Bond It SBR Admixture - White 2.5L 
Irwin Jack Plus 880 Universal Handsaw - 20" (Pack of 10) 
Everbuild Stixall Extreme Power - Black 290ml (Box of 12) 
Bostik Builder Tape, 50mm - 25m 
Soudal Window & Door Expanding Foam - Genius Gun Max 600ml Champagne 
Ronseal Exterior Yacht Varnish - Gloss 1L 
Ulti-Mate Interlocking Roof Vent Tile - Charcoal 
Timloc 1204 Underfloor Vent Vertical Extension + 150mm 
Everbuild Everflex 200 Contractors LMA Silicone - Transparent 295ml (Box of 25) 
Silweld Repair Tape, Black - 3m 
Bond It Mega Stik PU Adhesive - Beige 750ml 
Timloc Over Fascia Vent - 1m 
DeWalt FLEXTORQ Set PZ2 + Drive Guide in Small Bulk Storage Case 
Code 5 Cast Lead - 914mm x 3m 
Bond It All Weather Roofing Compound - Black 5L 
Everbuild All Purpose Ready Mixed Filler - 1kg 
Bond It Professional Foam Gun Applicator 
OX Tools Pro Heavy Duty Flexi Tub - 73L 
Everbuild Overlap & Border Adhesive - White 250g 
Uses
The Rubber Bitumen Emulsion by Bond is excellent and highly effective at providing a damp-proof membrane in sandwich constructions and water protection for floors, walls, and other above-ground structures. It's formed into a bituminous waterproofing compound that can also act as a curing membrane when applied to green concrete. This product can also be an equally effective adhesive for wood blocks, wood mosaic panels, insulation boards, expanding polystyrene, and cork panels.
Preparation
Preparing the surface should be done in accordance with the British Standard 8102 Code of Practice—for the protection of buildings against water from the ground. Besides that, cleaning the surface and removing any contaminants that can hinder this product's adhesion, including dirt, dust, grease, oil, organic growth, etc., should be removed.
Application
- This product should be applied via brush.
- When applying it to damp-proof floors, apply two coats with the second brushed perpendicular to the first, then apply a 50mm sand/cement or concrete screed on top.
- For weatherproofing walls, it depends on how damp they are. If it's extremely damp, hack away to the brickwork and apply three coats of the emulsion to the interior and if you can, exterior as well.
- If they aren't as damp, but damp is present, remove any paint or wallpaper and lightly dampen the wall with water, then apply three coats over. Ensure when applying to internal walls, you allow a 300mm deep horizontal strip along the top of the wall to allow any moisture to escape via evaporation.
