Bostik Handy Hot Melt Glue Gun

How to Use

Fit the metal stand onto the front of the gun in the slots by the nozzle. Load a Bostik Handy Hot Melt Glue Stick through the grip ring at the rear of the gun. Press the trigger several times until the stick is firmly embedded in the gun. Plugin the gun and a light will come on at the rear to indicate that it is in operation. Rest the gun on its stand and allow it to warm up for approximately 5 minutes. Ensure surfaces to be bonded are clean and dry. Press trigger until adhesive flows from the nozzle. To ensure a continuous flow of glue, insert further glue sticks into the rear of the gun and wait a few minutes until the stick has heated to the correct temperature. Apply adhesive to one surface. Press surfaces together within 15 seconds. Use of a clamp or other holding device is not necessary.

Unplug the gun when finished and allow it to cool before storing. Surplus glue stick may be trimmed off using a sharp knife. Do not pull glue sticks from the back of the gun as damage may occur.