OX Tools Winter Set - Beanie, Socks, Thermal Gloves 
Cromar Roof Felt Adhesive - Black 2.5 Litre 
Everbuild Febond PVA - 5L 
Klober Thin Line Vent - Terracotta KG9855-3-0152 (Box of 10) 
ALM Code 6 Milled Lead Flashing - 850mm x 6m 
Bond It PVA & Adhesive Sealer - White 5L 
Soudal Butyrub Non-Setting Mastic - Grey 300ml 
Cromar Vent 3 Light Breathable Membrane - 1m x 25m 
Bond It Caulk-Mate One Hour Decorators Caulk - White EU4 
BORA Centipede 2ft x 4ft x 30in Unit - 4 X-Cups + 2 Clamp + C/S Bag 
Bond It Organic Cleaner - Clear 2.5L 
Irwin Jack Plus 880 Universal Handsaw - 20" 
Bond It All Weather Roofing Compound - Black 5L 
Timloc Double Pantile Tile Vent Grey (Box of 6) 
ALM Code 5 Milled Lead - 210mm x 3m 
Everbuild Stixall Extreme Power – Brown 290ml 
Everbuild Black Jack 908 DPM – 5 Litre 
Ronseal Ultra Tough Satincoat Clear Varnish - 5L 
How to Use
Fit the metal stand onto the front of the gun in the slots by the nozzle. Load a Bostik Handy Hot Melt Glue Stick through the grip ring at the rear of the gun. Press the trigger several times until the stick is firmly embedded in the gun. Plugin the gun and a light will come on at the rear to indicate that it is in operation. Rest the gun on its stand and allow it to warm up for approximately 5 minutes. Ensure surfaces to be bonded are clean and dry. Press trigger until adhesive flows from the nozzle. To ensure a continuous flow of glue, insert further glue sticks into the rear of the gun and wait a few minutes until the stick has heated to the correct temperature. Apply adhesive to one surface. Press surfaces together within 15 seconds. Use of a clamp or other holding device is not necessary.
Unplug the gun when finished and allow it to cool before storing. Surplus glue stick may be trimmed off using a sharp knife. Do not pull glue sticks from the back of the gun as damage may occur.
