Ulti-Mate 10K Slate Vent Adaptor 
Everbuild Flue Jointing Compound - 1kg 
Timco Driver and Ground Jobber Bit Set 
Restec GRPROOF 1010 Top Coat Resin - 10kg 
Everbuild Black Jack 901 Black Bitumen Paint – 25 Litre 
Everbuild Gun A Nail Standard – White 310ml (Box of 25) 
Siroflex Trade Superglue Activator Spray - 200ml 
Timco Heavy Duty Tarpaulin - 4m x 5m 
Everbuild Pro Blue Masking Tape - 25mm x 33mm 
Everbuild Jumbo Mitre Fast Kit (Box of 6) 
Code 7 Cast Lead - 390mm x 3m 
Bond It PVA & Adhesive Sealer - White 1L 
Code 6 Cast Lead - 450mm x 3m 
Soudal Construction Silicone, Clear - 290ml 
Everbuild Showerproof Bathroom Silicone - Clear 280ml 
Code 8 Cast Lead - 240mm x 6m 
Soudal Manual Foil Pack Gun Aluminium, 600ml (Sealant Gun for Sausages) 
ALM Code 7 Milled Lead - 1000mm x 6m 
Soudal B1 Fire Class Expanding Foam Handheld - 750ml 
Easy-Trim Universal Dry Verge System Black (Pallet of 400) 
Everbuild Mitre Fast Activator – 200ml (Box of 12) 
Uses
This Everbuild All Purpose Ready Mixed Filler is essential for any D.I.Y enthusiast or Tradesman looking to repair various surfaces. This product dries to a smooth but tough, crack-resistant sandable finish, allowing you to perfectly repair a hole to a flush finish. This product is suitable for internal and external use, offering various areas of applications; this product is suitable for surfaces such as;
- Plaster
- Brick
- Wood
- Stone
- Render
Preparation
You must prepare all surfaces correctly to achieve a good key and optimal adhesion. Remove any dust, oil, dirt, grease or similar contaminants, cover any nail or screw heads with oil-based paint and allow to dry.
Application
- Stir well before use and apply directly from the tub into the filling area.
- This product can fill a gap with a maximum depth of 9mm. If you want to fill a more significant depth, apply in layers and allow 1 hour between each layer so it can fully cure.
Limitations
- Do not use to fill plastics or metals.
- This product is unsuitable to be applied when rain is imminent or within 5 hours of application.
- Do not apply in temperatures below 5°C.
- Not suitable for repairs in permanently wet areas
- Do not apply more than 9mm depth per application. (e.g. if the gap is 27mm deep, it will take 3 coats at 9mm depth each with an hour between each one)
