Everbuild Anchorset Green 150 - Grey 150ml

Uses

The Everbuild Anchorset Green 150 is a high-quality, powerful anchor curing system, perfect for applications requiring fixing fixtures carrying heavy loads. It is crafted by Everbuilds technicians to provide excellent weathering resistance, ensuring a long-lasting, high-performance system.

This product is fitted with a unique, EASY-FLOW technology, allowing the twin bag system within the cartridges to apply the whole system with just a standard sealant applicator gun. Application this product is typically used in include;

• Securing machinery into floors
• Fixing stud and starter bards
• Installing satellite dishes
• Fixing wall ties, bolts and screws into a wide range of building substrates

Preparation

Drill a hole in the area, ideally using a rotary percussion machine. For optimal results, create a coarse-sided hole by using a diamond drill. Use a stiff brush or a hand-held air pump to remove all dust and debris.

Clean all bars thoroughly, ensuring they are free from oil, grease, and other contaminants that could hinder adhesion. Chisel the ends of threaded rods or studs to prevent them from unscrewing from the cured resin.

Application

1. Unscrew the lid and cut the top of the bag under the metal clamp.
2. Attach the mixing nozzle to the cartridge, securing it tightly with your hands.
3. Place the cartridge into a standard sealant applicator gun/tool.

4. To begin, slowly and steadily apply pressure or squeeze the gun handle until the material starts flowing through the nozzle. Once the flow begins, continue applying consistent pressure on the handle to maintain a steady, even stream. As the material moves through the nozzle, carefully watch for a smooth and uniform color, which indicates proper mixing and flow.

   Next, to achieve the best possible results, keep a steady hand and apply consistent pressure throughout the entire process. Moreover, be sure to move at a uniform pace to prevent uneven coverage and ensure a professional, polished finish.

5. Fill the hole to a desired amount, and release the pressure by pressing the slide-release arm and pulling back the slide rail. Wipe off excess material and insert the fixing slowly using a rotating action to the desired depth.

Limitations and Notes

• Do not use this on non-porous substrates, such as metal or PVCu, as these materials may not allow proper adhesion