Everbuild Black Jack 902 Bitumen & Flashing Primer – 1 Litre 
Timco FirmaHold Collated Clipped Head Nails - Gun Nails (3.1mm x 90mm) 
Everbuild Mitre Fast Activator – 200ml 
Ronseal Multi Purpose Smooth Finish Filler - 2.2Kg 
Everbuild Flexible Decorators Filler – White 290ml 
Restec GRPROOF 1010 Base Coat Resin - 20kg 
Easy-Trim Universal Dry Verge System Black (Pallet of 800) 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – Clear 300ml (Box of 12) 
SikaFlex 221 Adhesive & Sealant - Black 300ml (Box of 12) 
Code 4 Cast Lead - 914mm x 3m 
ALM Code 3 Milled Lead - 390mm x 6m 
Code 3 Cast Lead - 360mm x 3m 
Bond It Rubber Bitumen Emulsion - Black 25L 
Everbuild Everflex 200 Contractors LMA Silicone - Black 295ml (Box of 25) 
ALM Code 7 Milled Lead - 300mm x 6m 
Code 7 Cast Lead - 450mm x 6m 
Everbuild Lumberjack 550 Floor Adhesive – 600ml 
Soudal Fix ALL Turbo - White 290ml 
Bond It Contractors PVA - 1L White 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Terracotta (Box of 5) 
ALM Code 6 Milled Lead Flashing - 210mm x 6m 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Clear - 300ml (Box of 12) 
Code 6 Cast Lead - 300mm x 6m 
Everbuild Anchorset Green 150 - Grey 150ml 
Uses
The Coving Adhesive & Joint by Everbuild is the perfect product for home improvements in applications such as fixing plaster coving, polystyrene and cornices to walls and ceilings. This product delivers excellent gap-filling properties, with its cured state suitable for painting on top. Other positive features include extended open times, which help you align and reposition, allowing you to achieve your desired finish.Â
Preparation
It's essential to prepare the application area to achieve optimal results. Start by cleaning the area, removing contaminants that can hinder the adhesion, and afterwards, ensure that the area doesn't have wallpaper, as this product will struggle to adhere. Finally, prime the surface and allow it to dry.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at 45°, with an opening of 6-9mm.
- Point the tip of the cartridge to the surface and extrude the adhesive by pressing the trigger
- Bring both surfaces together and firmly press them for a few seconds. If the surface is hanging, provide temporary support to allow optimal curing.
Limitation and Notes
- This product is not suitable for exterior applications
- In damp, humid or cold conditions, the curing time will be extended
- New plaster must be allowed at least four weeks to mature
- Always provide temporary support until the adhesive has cured
- Not suitable for polyurethane coving/trims
- Do not use if both surfaces are porous
- This product is not suitable for application in wet
