Code 3 Cast Lead - 760mm x 3m 
ALM Code 8 Milled Lead - 510mm x 6m 
FloPlast Square Line Gutter Angle 135° Black 
Soudal Insulating Foam Genius Gun 750ml - Champagne (Box of 12) 
Timco Lifting Sling 3000kg Limit - 2m x 90mm 
Easy-Trim Lead R Flashing Smooth – 600mm x 5m 
Everbuild 502 Wood Adhesive – 1 Litre 
ALM Code 7 Milled Lead - 914mm x 6m 
OX Pro OX-P133855 Easy Start Handsaw 550mm / 22in 
Ronseal 6 Year Anti Mould Paint - White Silk 750ml 
Code 6 Cast Lead - 360mm x 6m 
Soudal Soudafoam Gap Filler Hand Held 750ml (Box of 12) 
Ronseal Exterior Yacht Varnish - Gloss 2.5L 
OX Tools 12 inch / 300mm Pro Stainless Steel Plasterers Mud Pan 
Gorilla Contact Adhesive Tube - Clear 75g 
ALM Code 3 Milled Lead - 800mm x 6m 
OB1 Diamond Crystal Clear Universal Sealant & Adhesive 290ml 
OX Trade Medium Red Carpenters Pencils - Pack of 10 
Timloc Double Roman Tile Vent Brown (Box of 6) 
Code 4 Cast Lead - 600mm x 6m 
Bulk Pallet 72 Packs- FirmaHold 2.8 x 63/3CFC Collated Clipped Head Nails & Fuel Cells - Ring Shank 
Ronseal One Coat All Surface Primer and Undercoat - White 2.5L 
Everbuild Firefoam B1 Gun Grade Expanding Foam - Pink 750ml 
Everbuild Quick Drying Clear Varnish - Matt 2.5L 
Siroflex Trade Strength Glue Screws SF Adhesive 
Everbuild P11 Central Heating System Cleanser – 1 Litre 
Everbuild Black Jack 906 Bitumen Roofing Emulsion – 5 Litre 
Uses
The AquaMate Sealant by Everbuild is a purpose-built aquarium manufacturing sealant that's perfect due to its harmless, fish-friendly composite mixed with a sealant suitable for constant water immersion. Despite its purpose-built aquarium manufacturing compatibility, you can also use it in sealing bond liners and all supply and drainage piping.
Preparation
Before commencing the application, preparing the surface is vital to ensure optimal results are achieved. Start by removing contaminants on the surface, including dirt, dust, oil, grease, etc. All glass must be cleaned prior to application.
Application
It's important to thoroughly read the instructions for manufacturing the aquarium, which can be found by reading the technical data sheet. For aquarium manufacturing, you must understand the required dimensions of the joints, and you can calculate this by;
E = 6 x H² x L / [100 x T x 2 (H + L)]
E = required thickness of structural seal in mm
H = height of aquarium in cm
L = Length of aquarium in cm
T = Tensile strength of sealant (kg/cm²)
The Everbuild AqauMate has a Tensile Strength of 10kg
Limitation and Notes
- Highly porous surfaces will require priming to achieve optimal results.
- Not suitable for application on substrates that bleed oils, solvents or plasticisers.
- Due to pond liner materials varying, preliminary tests are suggested to ensure compatibility.
- Always wash out ponds and aquaria after use to ensure you remove residual acetic acid; you can complete a pH test to check
- Ensure all sealants have fully cured before moving or filling with water.
