Hambleside Danelaw Single Pantile Roof Tile Vent, TV10/8 - Terracotta (Box of 5) 
ALM Code 4 Milled Lead - 360mm x 6m 
Hambleside Danelaw TV15/4 Tile Vent - Terracotta (Box of 5) 
Klober Single Pantile Vent - Slate Grey KG9860-0429 (Box of 10) 
Everbuild Mammoth Packaging Tape - 48mm x 50m 
Timco 25 Spanner Set 
Timco Extra Heavy Duty Hand Cleaner with Pump - 4 Litres 
ALM Code 8 Milled Lead - 210mm x 6m 
Ronseal Stays White Ultra Tough White Matt Paint - 2.5L 
Code 5 Cast Lead - 150mm x 6m 
Soudal 5 Minute D4 Wood Adhesive Liquid – 750g (Box of 12) 
Everbuild Constructa-Pro Adhesive Foam - Grey 750ml (Box of 12) 
ALM Code 3 Milled Lead - 760mm x 6m 
Code 6 Cast Lead - 240mm x 6m 
Soudal Genius Gun Building Adhesive 750ml - Champagne 
Bond It Drive Alive Tarmac Restorer - 4 Litres 
Ronseal Anti-Condensation Paint - White 2.5L 
Code 8 Cast Lead - 300mm x 6m 
Soudal Genius Gun Soudafoam Window and Door - 600ml (Box of 12) 
Everbuild Standard Nozzle - 6 Pack (290mm & 310mm) 
Ronseal Trade 10 Year Woodstain - Dark Oak 2.5L 
Everbuild Stixall Extreme Power – Clear 290ml 
Everbuild Lumberjack 5 Minute Wood Adhesive Deal 
Uses
The AquaMate Sealant by Everbuild is a purpose-built aquarium manufacturing sealant that's perfect due to its harmless, fish-friendly composite mixed with a sealant suitable for constant water immersion. Despite its purpose-built aquarium manufacturing compatibility, you can also use it in sealing bond liners and all supply and drainage piping.
Preparation
Before commencing the application, preparing the surface is vital to ensure optimal results are achieved. Start by removing contaminants on the surface, including dirt, dust, oil, grease, etc. All glass must be cleaned prior to application.
Application
It's important to thoroughly read the instructions for manufacturing the aquarium, which can be found by reading the technical data sheet. For aquarium manufacturing, you must understand the required dimensions of the joints, and you can calculate this by;
E = 6 x H² x L / [100 x T x 2 (H + L)]
E = required thickness of structural seal in mm
H = height of aquarium in cm
L = Length of aquarium in cm
T = Tensile strength of sealant (kg/cm²)
The Everbuild AqauMate has a Tensile Strength of 10kg
Limitation and Notes
- Highly porous surfaces will require priming to achieve optimal results.
- Not suitable for application on substrates that bleed oils, solvents or plasticisers.
- Due to pond liner materials varying, preliminary tests are suggested to ensure compatibility.
- Always wash out ponds and aquaria after use to ensure you remove residual acetic acid; you can complete a pH test to check
- Ensure all sealants have fully cured before moving or filling with water.
