Hambleside Danelaw TV15/7 Tile Vent - Black (Box of 5) 
Youngman Spacemaker Loft Ladder (30234000) 
Soudal PVCu Solvent Frame Cleaner - 1L 
Code 5 Cast Lead - 180mm x 3m 
Ronseal Multi Purpose Smooth Finish Filler - 1.2kg + 50% Free 
Timco Aluminium Hawk 
ALM Code 5 Milled Lead - 240mm x 3m 
Everbuild 209 Liquid Mortar Tone - Black 1 Litre 
Bond It Aerosol Spray Adhesive 500ml Beige - Box of 12 
Everbuild Pinkgrip SF Solvent Free Adhesive – 380ml 
Ox Tools OX Pro Aviation Snips With Holster - Left Cut (Red) 
Everbuild 503 SBR Bond – 2.5 Litre 
Everbuild 709 FebFlor Floor-Flex Plus - 5 Litre 
Everbuild Jumbo Mitre Fast Kit (Box of 6) 
Bond It Contractors PVA - 1L White 
Code 7 Cast Lead - 150mm x 3m 
Freeflow Square Gutter System Gutter 135° Angle - White 
Everflex Premium+ 450 Builders Silicone – Grey 300ml (Box of 25) 
Permavent Black Breather Membrane – 1m x 20m 
Timloc 3014C Over Fascia Ventilation System 1M - Black 
Everbuild 501 PVA - 2.5 Litre 
Everflex Contract AC50 Acoustic Sealant & Adhesive - White 900ml (Box of 12) 
Soudal Roof & Gutter Sealant – Black 290ml 
ALM Code 6 Milled Lead Flashing - 914mm x 3m 
Right Hand Klober Contract Dry Verge Unit Brown 
Klober Dry Ridge System, 6m (KR5200) 
Timloc Double Roman Tile Vent Red (Box of 6) 
Bond It Mega Foam Gun/Aerosol PU Expanding Foam - Beige 750ml 
Everbuild Stixall Extreme Power - Brown 290ml (Box of 12) 
Soudal Genius Gun Pipe & Plumbing Foam – 600ml (Box of 12) 
Uses
Everflex Heat-Mate Sealant by Everbuild offers a multitude of applications for industrial uses; it works well as a gasket sealant and can be used for joints and assemblies which must be resistant to high temperatures. These application areas include ducting, metal chimneys, industrial and domestic ovens, and other heat appliances.
Preparations
All surfaces must be prepared before commencing the application. Complete it by removing any contaminants that can hinder the adhesion; these include dust, dirt, oil, grease, old sealant and mastic. Highly porous surfaces such as new plaster should be primed before application.
Application
- Cut the top of the cartridge without damaging the threaded screw.
- Screw the nozzle onto the cartridge, and cut it at a 45° angle with an opening slightly larger than the gap to be filled.
- Apply firm, even pressure to the gun using a standard sealant gun, which will extrude the sealant with an even bead to enhance optimal adhesion.
Limitations
- Do not use on porous surfaces such as brick, concrete and stone
- This product is not suitable in conjunction with lead, bitumen or asphalt
- Do not use soft metals such as lead or brass
- On temperatures above +250°C, slight discolouration may occur, but the integrity of the sealant won't be affected.
- This product is not suitable for above the temperature of 275°C.
