Bond It Mould Stop - Clear 5L 
ALM Code 4 Milled Lead - 210mm x 3m 
Soudal Genius Gun Plasterboard Adhesive - 750ml 
Ronseal One Coat Water-Based Tile Paint - White Satin 750ml 
Bond It 5 Minute PU Wood Gel Translucent 300ml - Box of 12 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Brown (Box of 5) 
Soudal Pro 40P PU Wood Adhesive - 750g 
Everbuild Coving Adhesive & Joint Filler - 290ml 
Ronseal One Coat Damp Seal - White 750ml 
ALM Code 5 Milled Lead - 360mm x 3m 
Timco Flat Wood Bit Set 
Klober Double Roman Roof Tile Vent - Slate Grey KG9857-3-0429 (Box of 10) 
Timco Copper Slate Straps 
Everbuild 506 Universal Contractors PVA - 5Kg White 
Everbuild Black Jack 903 Bitumen Trowel Mastic – 5 Litre 
Timloc Single Pantile Tile Vent Terracotta (Box of 11) 
Code 7 Cast Lead - 800mm x 3m 
Everbuild 402 Waterseal – 5 Litre 
Ronseal Exterior Yacht Varnish - Satin 1L 
FloPlast Half Round Stop End Outlet, White – 112mm 
Everbuild Contract AC50 Acoustic Sealant & Adhesive White - 380ml (Box of 12) 
The Filler Coat by Everbuild is a high-quality, unique product used to seal over previous fillers and hairline cracks, delivering a key ideal for subsequent decorating. It's delivered in a ready-to-use tub that is applied through a simple pile-roller application. It's ideal for covering intense colours and, therefore, perfect for transforming rooms from a bright pink to a bright blue.
Preparation
Prepare the area to achieve optimal results. Start by ensuring the surface is sound, stable and free from contaminants such as dirt, dust, oil, grease, loose debris, etc. Glossy surface must be sanded and cleaned with a sugar soap before applying.
Application
- Stir the Filler Coat well before use
- Touch in corners using a brush, whilst, with open areas, you can use a pile-roller. Try not to overspread.
- Leave the surface to dry for at least 4 - 6 hours; please note it may take longer if the temperatures are cold.
Limitations and Notes
- Do not apply in temperatures below 10°C
- This should not be applied to heated surfaces
- This product will fill small imperfections on a surface, but it will not fill significant gaps.
- Very porous and powdery surfaces must be primed before painting
- New plaster must be primed and fully dry before applying the filler coat
- Do not use in contact with bitumen.
