Everbuild Power Pro Sealant Gun - 290 to 380ml (Box of 12) 
ALM Code 8 Milled Lead - 390mm x 3m 
Thompson's One Coat Waterseal - 5L 
Bond It Professional Foam Gun Applicator 
Code 6 Cast Lead - 450mm x 6m 
ALM Code 3 Milled Lead - 390mm x 6m 
Code 7 Cast Lead - 510mm x 6m 
OB41 Silicone Lubricant Spray 400ml 
Bond It Frame-Mate Door & Window Sealant - Brown EU3 
Everbuild 501 PVA - 2.5 Litre 
ALM Code 5 Milled Lead - 1200mm x 6m 
Soudal Gun & Foam Cleaner Gun Grade - 500ml 
Everbuild Constructa-Pro Adhesive Foam - Grey 750ml 
Everbuild Silicone Spray - 400ml 
Everbuild Black Jack 904 Roof Felt Adhesive – 25 Litre 
Soudal PVCu Gap Filler, White - 300ml 
FloPlast Square Line Internal Stop End Black – 114mm 
Samac Galvanised ELH Felt Nails - 1kg (15mm x 3.00mm) 
Bond It B3 Fill And Fix Expanding Foam Aerosol - Beige 500ml 
Everbuild Bath & Kitchen Sealant – White 290ml 
OX Trade Medium Red Carpenters Pencils - Pack of 10 
ALM Code 4 Milled Lead - 600mm x 3m 
FloPlast Square Line Downpipe Clip White 
Everbuild Everflex Contract AC95 Intumescent Sealant & Adhesive - 900ml 
ALM Code 6 Milled Lead Flashing - 150mm x 6m 
Everbuild Lumberjack 30 Minute PU Wood Adhesive Gel - 310ml (Box of 12) 
Uses
This product has outstanding properties allowing it to be used on various surfaces in various environments. It is suitable for sealing around baths, showers, basins and other sanitary ware, and it can also seal worktops, laminates and aluminium gutter sealing. You can also use this product as an adhesive, and it's excellent for fixing PVCu Trims, cladding and panels together.
Preparation
Before you can begin the application, you must prepare the surfaces. You can achieve this by removing dust, loose flakes, old sealants, grease, oil and other contaminants that can hinder the adhesion. Once you have completed this, make sure you dry the surface, and then you can begin application.
If the application area has a large gap, use an expanding foam or joint backing rod to support the silicone bond. Otherwise, you'll use more silicone sealant than needed to fill the void.
Applications
- Unscrew the top of the cap.
- Cut the nozzle at a 45° angle with an opening slightly larger than the gap to be filled.
- Squeeze the tube, apply even pressure and begin the application.
- Smooth down the sealant within 15 minutes of application, and you can do this by using a spatula or a piece of wood wetted with a soap and water solution.
