Everbuild Everflex Fire Mate Intumescent Sealant – 295ml 
Code 4 Cast Lead - 240mm x 3m 
Code 3 Cast Lead - 450mm x 3m 
Klober Double Roman Roof Tile Vent - Terracotta KG9857-3-0152 (Box of 10) 
Timloc Single Pantile Tile Vent Red (Box of 11) 
Lead Roofing Wood Core Roll (50mm x 2.4m) 
ALM Code 8 Milled Lead - 510mm x 6m 
Bond It Gripbond - Solvent-Free Adhesive - White 350ml 
Ronseal Exterior Multi-Purpose Smooth Finish Filler - Grey 1.2Kg 
Everbuild P18 Gas Leak Detector - 400ml 
Everbuild Caulk Once – White 380ml (Box of 12) 
Uses
This product has outstanding properties allowing it to be used on various surfaces in various environments. It is suitable for sealing around baths, showers, basins and other sanitary ware, and it can also seal worktops, laminates and aluminium gutter sealing. You can also use this product as an adhesive, and it's excellent for fixing PVCu Trims, cladding and panels together.
Preparation
Before you can begin the application, you must prepare the surfaces. You can achieve this by removing dust, loose flakes, old sealants, grease, oil and other contaminants that can hinder the adhesion. Once you have completed this, make sure you dry the surface, and then you can begin application.
If the application area has a large gap, use an expanding foam or joint backing rod to support the silicone bond. Otherwise, you'll use more silicone sealant than needed to fill the void.
Applications
- Unscrew the top of the cap.
- Cut the nozzle at a 45° angle with an opening slightly larger than the gap to be filled.
- Squeeze the tube, apply even pressure and begin the application.
- Smooth down the sealant within 15 minutes of application, and you can do this by using a spatula or a piece of wood wetted with a soap and water solution.
