Timco Round Wire Nails, Pack of 40 
Soudal Fix ALL High Tack Hybrid Sealant - Invisible 290ml 
Code 6 Cast Lead - 800mm x 3m 
Code 8 Cast Lead - 150mm x 6m 
Bond It Wood Pro High Strength Flexible Hybrid Adhesive - EU3 Buff 
Hedgehog Gutter Brush Leaf Guard Black – 4m x 100mm 
Lead Flexi Slate Pipe Flashing - Pitched 
Timco Bulk Pallet 50 Packs - Classic Multi-Purpose Screws 4.0 x 50 Double Countersunk - A2 Stainless Steel - 200 Box 
Timloc Thin Leading Edge Tile Vent Black 
FloPlast Half Round Gutter 90° Bend, Brown – 112mm 
OX Tools Pro Carpenters Square & Angle Finder 300mm / 12in 
Ronseal Anti-Condensation Paint - White 2.5L 
Bond It One Hit Wonder Lightweight Filler - White 500ml 
Bond It Caulk-Mate One Hour Decorators Caulk - White EU4 
FaithFull Soft Grip Chisel - 4 Piece Set 
Code 4 Cast Lead - 600mm x 3m 
Everbuild Stixall Extreme Power – Grey 290ml 
Soudal Orange Skeleton Gun - Up to 310ml 
Bostik Flexacryl Instant Repair Waterproofing - Grey 5kg 
Everbuild Contract AC50 Acoustic Sealant & Adhesive White - 380ml (Box of 12) 
Everbuild Wood Filler Hardener / Catalyst - 40g 
Uses
This Heat Resistant Paint by Everbuild is excellent at resisting high temperatures of heat, and it is designed to be applied in domestic settings, such as ovens, flutes, chimneys etc. It has an easy application; you can either spray or brush this product onto the surface.
Preparation
Ensure all surfaces are cooled and free from impurities that can hinder this product, that includes rust, dust, soot, grease etc.
Application
- Shake the can vigorously for at least 1 minute before application.
- Hold the can 15-20 cm from the surface and spray in long, even strokes.
- The paint film will harden once the article is heated for the first time.
- This product will take 15 minutes to dry on the surface; however, it will take 1 hour to handle. The paint will fully cure once the surface has been heated up for the first time. Alternatively, you can stove the object for about 20 minutes at 200-220°C.
Limitations
- It is recommended to be done in a well-ventilated area.
- Low temperature/high humidity will impair drying.
- Do not apply this product when the ambient temperature is below 5°C or RH exceeds 90%
- Avoid inhalation of vapours and spray mists.
- Do not spray on naked flames or any incandescent materials.
