Timco Precision Screwdriver Set 6pcs 
Bond It Bitumen Paint - Black 1L 
Hambleside Danelaw Single Pantile Roof Tile Vent, TV10/8 - Slate Grey (Box of 5) 
Ronseal Diamond Hard Floor Paint - Anthracite Satin 750ml 
Code 4 Cast Lead - 914mm x 3m 
ALM Code 8 Milled Lead - 240mm x 6m 
OX Pro Moulding Bar - 10" / 250mm 
FloPlast Side Fix Rafter Bracket 
Over Fascia Vent, 25mm Single 
Ronseal One Coat Water-Based Tile Paint - Black Satin 750ml 
Kwik Flash Lead Tool - Turn In Setting Tool For Lead & Zinc Flashing 
Everbuild P13 Plumbers Putty - Beige 750g 
Code 6 Cast Lead - 390mm x 6m 
Bond It Rubber Bitumen Emulsion - Black 2.5L 
Bond It Organic Cleaner - Clear 2.5L 
10 x Permavent Black Breather Membrane – 1m x 50m 
Hambleside Danelaw TV15/4 Tile Vent - Brown (Box of 5) 
Ronseal Quick Drying Stain Block - Aerosol White 
Everbuild Pro Blue Masking Tape - 25mm x 33mm 
ALM Code 3 Milled Lead - 600mm x 3m 
Code 7 Cast Lead - 210mm x 6m 
Soudal Aquafix All Weather Sealant – Clear 300ml 
Everbuild Everflex Premium+ 565 Clean Room Silicone – White 295ml 
84 x ERidge Dry Fix Ridge System Black – 6m Kit 
SEAL PRO, Low Modulus Hybrid Universal Sanitary Sealant & Adhesive Bond, White - EU3 
Ronseal uPVC Cleaner - 750ml 
Everbuild Firefoam B1 Gun Grade Expanding Foam - Pink 750ml 
Everbuild Everflex AquaMate Aquarium Sealant – Translucent 295ml (Box of 12) 
Uses
This Heat Resistant Paint by Everbuild is excellent at resisting high temperatures of heat, and it is designed to be applied in domestic settings, such as ovens, flutes, chimneys etc. It has an easy application; you can either spray or brush this product onto the surface.
Preparation
Ensure all surfaces are cooled and free from impurities that can hinder this product, that includes rust, dust, soot, grease etc.
Application
- Shake the can vigorously for at least 1 minute before application.
- Hold the can 15-20 cm from the surface and spray in long, even strokes.
- The paint film will harden once the article is heated for the first time.
- This product will take 15 minutes to dry on the surface; however, it will take 1 hour to handle. The paint will fully cure once the surface has been heated up for the first time. Alternatively, you can stove the object for about 20 minutes at 200-220°C.
Limitations
- It is recommended to be done in a well-ventilated area.
- Low temperature/high humidity will impair drying.
- Do not apply this product when the ambient temperature is below 5°C or RH exceeds 90%
- Avoid inhalation of vapours and spray mists.
- Do not spray on naked flames or any incandescent materials.
