ALM Code 6 Milled Lead Flashing - 1000mm x 3m 
Leadax Lead Free Flashing Alternative 150mm (6m rolls) 
Everbuild Maximum Torque - White 290ml (Box of 12) 
Gorilla Glue - Dark Brown 1L 
Everbuild Tarmac Restorer - 5 Litre 
Ronseal Diamond Hard Floor Paint - Anthracite Satin 750ml 
Roughneck® V-Series Axe - 20oz/0.6kg 
ALM Code 8 Milled Lead - 1600mm x 3m 
Cromar Black Bitumen Paint - 5 Litre 
D4 Wood Adhesive – 1 Litre 
Code 5 Cast Lead - 360mm x 3m 
Soudal Swipex Wipes - 100 Wipes (Box of 6) 
Code 6 Cast Lead - 800mm x 6m 
Timco FirmaHold Collated Brad A2 Stainless Steel Nails - 16G x 50mm (2000 Pieces) 
Everbuild All Purpose Ready Mixed Filler - 1kg 
Everbuild Multi-Stick Adhesive - White 350ml 
Everbuild Lumberjack 5 Minute Polyurethane Wood Adhesive Liquid – 750ml (Box of 12) 
Everbuild Triple Action Wood Treatment – 1 Litre 
Bond It PVA & Adhesive Sealer White 500ml - Box of 20 
Bond It Contractors Grade PVA - White 500ml 
Bond It AS900 Acoustic Sealant - White 900ml 
Everbuild Everflex Lead Mate Sealant Grey - 295ml (Box of 25) 
Everbuild Everflex Pyro Mate Fire Rated Silicone – White 295ml (Box of 12) 
FloPlast Round 92½° Bend - White 
ALM Code 4 Milled Lead - 210mm x 3m 
Youngman Double Section Roof Ladder 3.77m (57663600) 
Everbuild Jumbo Mitre Fast Kit Superglue & Activator 
Uses
The Jetcem Deep by Everbuild is an outstanding, easy-to-mix, easy-to-apply, quick-setting cement that is perfect for repairing holes from 25-150mm. Everbuild technicians formulated this product to enable both tradespeople and D.I.Yers to easily use this product with a simple mixing process of adding water directly, creating a cement paste. Applications this product has been typically used in include;
- Interior and exterior repairs to gaps, cracks, walls and floors
- Repairing flags, stones, slabs and bricks
- Patching steps and window sills
- Pointing stone and brick
- Jointing earthenware drains and pipes
- Repair pools and ponds
- Setting W/C and sinks
- Leak sealing on concrete-based surfaces
- Setting railings and posts.
Preparation
Before commencing the application, ensure all surfaces are clean, sound, and free from contaminants such as dust, dirt, grease, oil, etc, and anything that can interfere with the adhesion.
Application
- Thoroughly wet surfaces to enhance the adhesion
- Using a clean vessel, add approx. 3 parts by volume Jetcem powder to 1 part by volume clean cold water and mix it immediately to a smooth, reasonably thick slump free paste.
- Note that this portion of cement is only workable for 5-10 minutes, so you should press it directly into the hold with a trowel or filling knife.
- If the product becomes stiff, dispose of it safely, as adding water doesn't improve workability; instead, it weakens the strength.
Limitations and Notes
- This product should not be used for load-bearing applications
- Do not use this product where chemical resistance is required.
- When repairing fishponds, seal repair with a suitable paint before re-stocking
- If you're filling gaps under 25mm, use Jetcem Rapid instead.
