Sika SikaBond SBR+ - 5L 
IKO 5U Eaves Protection Strips - 16m x 330mm 
Soudal Superglue Activator - 200ml (Box of 12) 
OX Tools Pro Combination Square 300mm / 12in 
Soudal Repair Express Plaster - White 900ml 
ALM Code 6 Milled Lead Flashing - 850mm x 6m 
Over Fascia Vent, 10mm 
Bond It Cove-Mate Coving Adhesive - White EU3 
FloPlast Square Line Stop End Outlet White – 114mm x 65mm 
Code 7 Cast Lead - 360mm x 6m 
Stanley Hi-Viz Tylon 5m/Ex19mm Tape 
Code 5 Cast Lead - 450mm x 3m 
Spax Magnetic Bit Holder - 1 Piece 
Thompson's uPVC Restorer - 480ml 
Bond It PVCu Solvent Fast Acting Cleaner - Clear 1L 
Armatool Mop Heads Size 12 
Cromar Vent 3 Classic Breathable Membrane - 1m x 50m 
Hambleside Danelaw (HD RSPA) Adaptor and Flexi for TV10 Range 
Restec GRPROOF 1010 Top Coat Resin - 10kg 
Everbuild KOS Fire Cement Buff – 2kg 
Timloc 1205 Underfloor Vent Horizontal Duct Adapter - 110mm 
Bond It The Beast PU Adhesive - Brown 250ml 
Evercryl Emergency Roof Repair - Clear 310ml 
Ronseal Precision Finish Brush - 2.5 Inch 
Ronseal Stays White 2in1 Paint & Primer - Satin 2.5L 
10 x Timloc 3014C Over Fascia Ventilation System 1M - Black 
Ronseal Diamond Hard Floor Wax - Natural Oak 2.5L 
Everbuild Black Jack 901 Black Bitumen Paint – 5 Litre 
OX Pro Rodless Sealant Gun - Up to 400ml 
Klober Double Pantile Vent - Terracotta KG9858-3-0152 (Box of 10) 
Everbuild General Purpose Silicone - Grey 280ml (Box of 12) 
Uses
The JETCEM Rapid by Everbuild is the ultimate quick repair product for concrete-based surfaces. Everbuild's technicians have formulated the JETCEM with a superb, fast-setting product, enabling swift application and easy repair. Applications where the JETCEM is perfect include;
- Internal and external repairs to gaps and cracks on floors and walls
- Repairing flagstones, slabs, stones and bricks
- Patching window sills and steps
- Jointing earthenware drains and pipes
- Repairing ponds and pools
- Setting in W/C's and sinks
- Leak sealing in concrete-based surfaces
- Setting posts and railing
Preparation
Before commencing the application, it's essential to prepare the surface. Complete this by removing any contaminants on the surface that can hinder the adhesion, including dirt, dust, oil, grease, etc.
Application
- Using a clean vessel, mix 3 parts volume powder to 1 part cold, clean water. You should only mix enough for up to 10 minutes of work, as after 10 minutes, the mixture becomes invalid for use. To know you've mixed it correctly, you should finish with a reasonably thick slump-free paste.
- Saturate the surface entirely using water.
- Using a trowel or filling knife, scoop the mixture into the application area.
- In warm conditions, you can cover the JETCEM with polyethene to assist in the curing process.
Limitations
- When mixing, it's important to mix only enough for up to 10 minutes. After 10 minutes, it will stiffen and become invalid; you cannot add water to it to try and soften it; this will weaken the cement.
- This product should not be used for load-bearing applications.
- Do not use this for holes deeper than 25mm.
- Do not apply where chemical resistance is required.
