ALM Code 6 Milled Lead Flashing - 850mm x 3m 
ALM Lead Expansion Joint - Code 5 - 260mm x 3m 
Bond It PVA & Adhesive Sealer - White 1L 
Bond It The Beast PU Adhesive - Brown 150ml 
Code 5 Cast Lead - 600mm x 3m 
Everbuild Industrial Superglue HV - Clear 50g 
ALM Code 7 Milled Lead - 1600mm x 6m 
Soudal Fix ALL X-treme Power - White 290ml 
ALM Code 4 Milled Lead - 760mm x 6m 
Soudal Construction Silicone, Grey - 290ml 
Bond It Aluminium Foil Tape - 100mm x 45M 
OX Tools Drywall Rasp 250mm 
FloPlast Square Line Gutter Angle 135° Black 
Everbuild Constructa-Pro Adhesive Foam - Grey 750ml 
Bond It Aerosol Spray Adhesive 500ml Beige - Box of 12 
Ox Tools Waterproof Latex Gloves Size 9 Large 
Bond It PVA & Adhesive Sealer - White 500ml 
Bond It Duct Tape - Silver 48mm x 45M 
Everbuild Stick2 Hard Plastic Adhesive - 30ml 
Uses
KOS Fire Cement by Everbuild is an excellent product that resists high temperatures. It comes in a ready-mixed blend of thermo-setting resins and temperature-resistant inorganic fillers that cures when exposed to heat to give a seal that is resistant to heat.
Preparation
The surfaces must be prepared, remove any dust, oil, grease or other contaminants present, and wet all surfaces to give a good key.
Application
- Use the product straight from the tub; soften it with water slightly if needed.
- Use a trowel and apply well into the area, filling and covering the surface.
- After the first application, increase the heat of the cement gradually over 4 hours. A crack may start to form; if so, re-apply the cement to the area, this will create a smoke-tight seal.
Limitations
- This product is not suitable as a gas sealant
- Always moisten the surface before applying
- Always apply heat gradually
- The Black will turn into a buff/grey colour above 650°C
- Not suitable for use where the product is exposed to water
