Code 5 Cast Lead - 800mm x 6m 
Colron Liquid Scratch Cover - Light 14ml 
ALM Code 8 Milled Lead - 150mm x 3m 
ALM Code 7 Milled Lead - 1000mm x 6m 
ALM Code 5 Milled Lead - 800mm x 3m 
Code 6 Cast Lead - 1600mm x 3m 
Armatool Flooring Kneepads 
Hambleside Danelaw TV15/4 Tile Vent - Black (Box of 5) 
Klober Single Pantile Vent - Brown KG9860-0247 (Box of 10) 
FloPlast Square Line Gutter Angle 135° Black 
Bond It PVA & Adhesive Sealer - White 1L 
Bond It Economy Sealant Gun - Blue 400ml (EU3 + EU4) 
Bond It Indian Stone Sealer - Clear 5L 
OX Tools Pro PolyZip 4 Piece Cutter Set - (15, 22, 35, 42mm) 
FloPlast Square Line Internal Stop End White – 114mm 
Everbuild Forever Ivory Silicone Sealant – 295ml (Box of 12) 
Everbuild EB25 Ultimate Sealant & Adhesive – Anthracite 300ml (Box of 12) 
ALM Code 6 Milled Lead Flashing - 180mm x 6m 
Everbuild Everflex Lead Mate Sealant Grey - 295 ml 
Everbuild 403 Concrete Hardener & Dustproofer – 5 Litre 
Uses
KOS Fire Cement by Everbuild is an excellent product that resists high temperatures. It comes in a ready-mixed blend of thermo-setting resins and temperature-resistant inorganic fillers that cures when exposed to heat to give a seal that is resistant to heat.
Preparation
The surfaces must be prepared, remove any dust, oil, grease or other contaminants present, and wet all surfaces to give a good key.
Application
- Use the product straight from the tub; soften it with water slightly if needed.
- Use a trowel and apply well into the area, filling and covering the surface.
- After the first application, increase the heat of the cement gradually over 4 hours. A crack may start to form; if so, re-apply the cement to the area, this will create a smoke-tight seal.
Limitations
- This product is not suitable as a gas sealant
- Always moisten the surface before applying
- Always apply heat gradually
- The Black will turn into a buff/grey colour above 650°C
- Not suitable for use where the product is exposed to water
