Bond It Saves Nails Solvent-Free - White EU3 
Everbuild 701 Non-Slip Tile Adhesive – White 3.75kg 
FloPlast Half Round Gutter 135° - Black 
Samac Copper Wire Coil 36m x 2mm 
Ronseal 6 Year Anti Mould Paint - White 400ml Aerosol 
Bond It Dec-Mate Flexible Filler - Magnolia EU3 
Code 5 Cast Lead - 1600mm x 6m 
Everbuild Dual Purpose Foam Cleaner – 500ml 
Everbuild 503 SBR Bond – 2.5 Litre 
FloPlast Half Round External Stop End, White – 112mm 
ALM Code 8 Milled Lead - 390mm x 3m 
Everbuild Anchorset Green 300 - Grey 300ml (Box of 12) 
ALM Code 3 Milled Lead - 210mm x 3m 
Timco Lithium EP2 Grease - 400g 
Cromar Alphachem Liquid Mortar Tone - Black 5L 
Timloc Interlocking Plain Tile Vent Brown (Box of 12) 
Ox Tools OX Pro Heavy Duty Sealant Gun - 290ml to 400ml 
Ronseal Precision Finish Brush - 3 Pack 
Oxyturbo Maxy Gas Refill 
Everbuild Silicone Eater Silicone Sealant Remover - 100ml (Box of 12) 
Everbuild Showerproof Bathroom Silicone – White 280ml 
Code 6 Cast Lead - 300mm x 6m 
ALM Code 5 Milled Lead - 180mm x 3m 
Sika MultiSeal Self Adhesive Bituminous Sealing Tape - (300mm x 10m) 
Everbuild Lumberjack 5 Minute Polyurethane Wood Adhesive Liquid – 750ml 
Left Hand Klober Contract Dry Verge Unit Grey 
Code 8 Cast Lead - 1600mm x 3m 
Everbuild Lumberjack 5 Minute PU Wood Adhesive Gel – 310ml 
ALM Code 4 Milled Lead - 800mm x 3m 
Everbuild Febond PVA - 5L 
Code 4 Cast Lead - 600mm x 6m 
Timco Round Wire Nails, Pack of 40 
Bond It Superglue Activator Accelerator Spray Cyanoacrylate Aerosol - 200ml 
Everbuild Black Jack 901 Black Bitumen Paint – 5 Litre 
Ronseal 6 Year Anti Mould Paint - White Matt 750ml 
Uses
KOS Fire Cement by Everbuild is an excellent product that resists high temperatures. It comes in a ready-mixed blend of thermo-setting resins and temperature-resistant inorganic fillers that cures when exposed to heat to give a seal that is resistant to heat.
Preparation
The surfaces must be prepared, remove any dust, oil, grease or other contaminants present, and wet all surfaces to give a good key.
Application
- Use the product straight from the tub; soften it with water slightly if needed.
- Use a trowel and apply well into the area, filling and covering the surface.
- After the first application, increase the heat of the cement gradually over 4 hours. A crack may start to form; if so, re-apply the cement to the area, this will create a smoke-tight seal.
Limitations
- This product is not suitable as a gas sealant
- Always moisten the surface before applying
- Always apply heat gradually
- The Black will turn into a buff/grey colour above 650°C
- Not suitable for use where the product is exposed to water
