Ronseal Stays White Ultra Tough White Matt Paint - 2.5L 
Ronseal Multi Purpose Wood Filler - Natural 930g 
ALM Code 8 Milled Lead - 360mm x 6m 
Everbuild Black Jack 903 Bitumen Trowel Mastic – 2.5 Litre 
FloPlast Square Line Running Outlet White – 114mm x 65mm 
Cavity Wall Weep Extension 
Bond It All Weather Roofing Compound - Black 5L 
Code 6 Cast Lead - 240mm x 6m 
Easy-Trim Universal Dry Verge System Black (Box of 50) 
Everbuild External Frame Sealant - White 290ml (Box of 12) 
Code 5 Cast Lead - 210mm x 3m 
Hambleside Danelaw (HD DPCA) Tile Vent Adaptor for TV10 Range 
Isoflex Special Primer - 750ml 
FrogTape® Multi-Surface Masking Tape - Green 36mm x 41.1m 
Everbuild Griptite Construction Adhesive - 350ml 
Timloc Single Pantile Tile Vent Brown (Box of 11) 
Everbuild Stixall Extreme Power – Brown 290ml 
OX Pro Dry Wall Hammer - 14 oz 
Soudal Adhesive Remover - 400ml 
Sika MultiSeal Self Adhesive Bituminous Sealing Tape - (300mm x 10m) 
Everbuild Everflex Contract 700T LMN Silicone - Bronze (Box of 25) 
OX Polyzip™ Flex C1 Cutter - 15mm to 28mm 
Everbuild Stick2 Spray Contact Adhesive – Beige 500ml 
Uses
KOS Fire Cement by Everbuild is an excellent product that resists high temperatures. It comes in a ready-mixed blend of thermo-setting resins and temperature-resistant inorganic fillers that cures when exposed to heat to give a seal that is resistant to heat.
Preparation
The surfaces must be prepared, remove any dust, oil, grease or other contaminants present, and wet all surfaces to give a good key.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and fit it into a standard sealant gun/applicator.
- Using a firm, continuous pressure, apply a zig-zag motion over the surface, ensuring that when you press the surface together, it spreads, filling the whole surface.
Limitations
- This product is not suitable as a gas sealant
- Always moisten the surface before applying
- Always apply heat gradually
- The Black will turn into a buff/grey colour above 650°C
- Not suitable for use where the product is exposed to water
