Everbuild 405 Path & Patio Seal – 5 Litre 
Everbuild 202 Integral Liquid Waterproofer – 5 Litre 
Timco Mixed Hose Clips 
ALM Lead Expansion Joint - Code 5 - 260mm x 3m 
OX Pro Mini Round Point Shovel 
Timco Chalk Line Set 
ALM Code 8 Milled Lead - 300mm x 6m 
Youngman Double Section Roof Ladder 4.89m (57664600) 
Everbuild 408 Super Seal - 5 Litre 
Bostik Penetration Primer For Roofs, Black - 5 Litre 
Timloc Felt Support Tray 600mm 
Everbuild Everflex 200 Contractors LMA Silicone - Black 295ml 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Brown - 300ml (Box of 12) 
Bond It Rubber Bitumen Emulsion - Black 2.5L 
Timco Skeleton Gun 
OX Pro Jab Saw - 6.5" / 165mm & Holster Pack 
OB41 Cut Tap Drill Fluid - 400ml 
FloPlast Half Round Fascia Bracket, White – 112mm 
ALM Code 7 Milled Lead - 914mm x 6m 
Soudal Trade Sanitary Silicone - White 290ml (Box of 12) 
FloPlast Round Line Downpipe Clip, Black 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Black (Box of 5) 
Permavent Easy Slate 500 - Box of 100 
OX Trade XL Cuts All Tiles Diamond Blade 
Bond It Mega Foam Gun/Aerosol PU Expanding Foam - Beige 750ml 
Bond It SBR Admixture - White 5L 
Uses
KOS Fire Cement by Everbuild is an excellent product that resists high temperatures. It comes in a ready-mixed blend of thermo-setting resins and temperature-resistant inorganic fillers that cures when exposed to heat to give a seal that is resistant to heat.
Preparation
The surfaces must be prepared, remove any dust, oil, grease or other contaminants present, and wet all surfaces to give a good key.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and fit it into a standard sealant gun/applicator.
- Using a firm, continuous pressure, apply a zig-zag motion over the surface, ensuring that when you press the surface together, it spreads, filling the whole surface.
Limitations
- This product is not suitable as a gas sealant
- Always moisten the surface before applying
- Always apply heat gradually
- The Black will turn into a buff/grey colour above 650°C
- Not suitable for use where the product is exposed to water
