Bond It Trowel Mastic - Black 2.5L 
FloPlast Half Round Union Unit - White 
Everbuild Everflex Lead Mate Sealant Grey - 295ml (Box of 25) 
Ronseal's EGC Hardener BPO - 30g 
Bond It Pro-Mate LMA Silicone - Translucent EU3 
ALM Code 5 Milled Lead - 180mm x 6m 
Code 5 Cast Lead - 450mm x 3m 
Ronseal Stays White Ultra Tough White Satin Paint - 2.5L 
Everbuild Lumberjack 5 Minute PU Wood Adhesive Gel – 310ml 
Klober Boll Roll Tile Vent KG6085, Brown 
ALM Code 8 Milled Lead - 800mm x 6m 
Timco FirmaHold Collated Clipped Head Nails - Gun Nails (3.1mm x 90mm) 
Siroflex Trade Superglue Activator Spray - 200ml 
OX Pro Pool Trowel, Rigid 450MM / 18" 
Ronseal Exterior Yacht Varnish - Gloss 1L 
Code 8 Cast Lead - 1000mm x 3m 
Timco 5 x 8m Heavy Duty Tarpaulin, Green 
Everbuild Flexible Decorators Filler – White 290ml 
Everbuild Stixall Extreme Power – Brown 290ml 
Ronseal Diamond Hard Floor Wax - Natural Oak 2.5L 
Bond It Dustproof & Hardener - Clear 5L 
Ronseal Stays White 2in1 Paint & Primer - Matt 750ml 
Everbuild Pro Blue Masking Tape - 25mm x 33mm 
Uses
KOS Fire Cement by Everbuild is an excellent product that resists high temperatures. It comes in a ready-mixed blend of thermo-setting resins and temperature-resistant inorganic fillers that cures when exposed to heat to give a seal that is resistant to heat.
Preparation
The surfaces must be prepared, remove any dust, oil, grease or other contaminants present, and wet all surfaces to give a good key.
Application
- Use the product straight from the tub; soften it with water slightly if needed.
- Use a trowel and apply well into the area, filling and covering the surface.
- After the first application, increase the heat of the cement gradually over 4 hours. A crack may start to form; if so, re-apply the cement to the area, this will create a smoke-tight seal.
Limitations
- This product is not suitable as a gas sealant
- Always moisten the surface before applying
- Always apply heat gradually
- The Black will turn into a buff/grey colour above 650°C
- Not suitable for use where the product is exposed to water
