Gorilla Wood Glue - Brown 1L 
OX Pro Impact Bit Set - 11 Piece 
OX Trade Jab Saw - 6.5" / 165mm & Holster Pack 
ALM Code 8 Milled Lead - 450mm x 6m 
Stanley Heavy-Duty Scraper - 75mm 
Ronseal Exterior Multi-Purpose Smooth Finish Filler - Grey 1.2Kg 
Everbuild Anchorset Green 300 - Grey 300ml 
Cromar Cold Gritting Solution - Black 25 Litres 
Everbuild Seal Rite Strip Out Tool 
ALM Code 4 Milled Lead - 300mm x 6m 
Klober Universal Tile Vent Grey KG9854 (Box of 10) 
Code 7 Cast Lead - 850mm x 6m 
Soudal Fix ALL Flexi – White 290ml (Box of 12) 
Timco Professional Wire Strippers 
Cromar Acrypol+ Plus Roof Coating Waterproof System - Grey 2.5kg 
Ronseal Stays White Ultra Tough White Matt Paint - 2.5L 
Code 6 Cast Lead - 1000mm x 3m 
Ronseal One Coat Wood Primer & Undercoat - White 750ml 
Everbuild Black Jack 901 Black Bitumen Paint – 1 Litre 
Thompson's Patio & Block Paving Seal - Wet Look 5L 
Everbuild P13 Plumbers Putty - Beige 750g 
Hedgehog Gutter Brush Leaf Guard Black - 4m x 200mm (Pallet of 24) 
ALM Code 5 Milled Lead - 210mm x 6m 
IKO Super Shed Felt - Black 8m Roll 
Timco M5 Form A Washer DIN 125 - 50 Pieces 
Uses
The Lead Mate Patination Oil by Everbuild is perfect for lead workers or D.I.Yers installing lead themself. Everbuild formulated this product to deliver exceptional protection and extend the lead life, ensuring a visually pleasing look. It combats carbonate staining and aids the natural patine of the lead so it can be formed.
Preparation
- You must always wear gloves when applying this product and ensure you're in a well-ventilated area. Surfaces must be totally dry before application.
- Application
- Using a soft, absorbent cloth, apply the oil evenly, working horizontally, starting at the top and maintaining a wet edge at all times.
- You should not apply this product in a circular motion; this will leave an impression on the lead.
- Only apply one coat to the surface before clipping the underside of the lead; apply the patination oil approximately 50mm from the edge.
- Apply to all areas, including trims, clips and coats between laps.
Limitations and Notes
- Do not allow this product to come into contact with either bitumen or polycarbonate sheets
- Always test a small, inconspicuous area before completing the entire application
