Klober Permo Ecovent - 1.1m x 50m 
FloPlast Half Round Downpipe Branch 67.5°, White 
Stanley Hi-Viz Tylon 5m/Ex19mm Tape 
Everbuild Multi-Purpose Wood Filler - 250ml Dark Oak 
Klober Double Pantile Vent - Brown KG9858-3-0247 (Box of 10) 
Code 5 Cast Lead - 1200mm x 6m 
Everbuild 502 Wood Adhesive – 1 Litre 
ALM Code 6 Milled Lead Flashing - 1200mm x 6m 
Ulti-Mate Forticrete SL8 Grey Tile Vent 
OX Spectrum Trade XL Mortar Raking Diamond Blade 115/22.23mm 
Everbuild Everflex 200 Contractors LMA Silicone - Black 295ml (Box of 25) 
OB41 Silicone Lubricant Spray 400ml 
Ronseal Precision Finish Brush - 1 Inch Angled 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Antique Red (Box of 5) 
FloPlast Half Round Gutter 135° - Black 
Siroflex Trade High Viscosity Superglue - 20g 
Ox Tools OX Pro Aviation Snips With Holster - Right Cut (Green) 
Thompson's Emergency Roof Repair Mastic - Black 750ml 
Everbuild Pinkgrip SF But It’s White – 380ml 
Bond It Multi-Purpose Powder Filler - White 450g 
SikaBond Waterproof PVA – 5 Litre 
Everbuild General Purpose Silicone - White 280ml (Box of 12) 
OB41 Multi-Use Brake Cleaner - 400ml 
ALM Code 7 Milled Lead - 450mm x 3m 
Everbuild 403 Concrete Hardener & Dustproofer – 5 Litre 
Oxyturbo Oxygen Refill 
Everbuild Pinkgrip Dryfix FR – 750ml 
Uses
The Lumberjack 30 Min PU Wood Adhesive by Everbuild offers outstanding bonding to common building surfaces and wood. Everbuild's technicians formulated this product to deliver a 30-minute curing time, allowing faster application, perfect for line manufacturing. Other manufacturing areas this is perfect for include manufacturing doors and windows, furniture and the construction of staircases and ladders.
Preparation
You should prepare the surface before starting the application, removing any contaminants on the surface, such as dirt, dust, oil, grease, etc. You need at least one surface to be porous; non-porous surfaces should be abraded to provide a key for the adhesive. You can further enhance the adhesion by slightly moistening one surface with a damp cloth; do not over-wet.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and fit it into a standard sealant gun/applicator.
- Using a firm pressure on the handle, apply the adhesive to one surface, and after applying it, bring the two surfaces together immediately.
Limitations
- One surface must be porous for successful bonding
- Not suitable for polyethylene, polypropylene, Teflon or Nylon.
- Surfaces must be damp, but the moisture content of wood must not exceed 30% w/w
- Only apply this product between the temperature of 5°C to 30°C
- Setting times will be increased at low temperatures and low humidity.
