FloPlast Half Round Downpipe 112° Bend, White 
ALM Code 3 Milled Lead - 240mm x 6m 
Ronseal Expanding Foam Filler - 300ml 
Code 7 Cast Lead - 300mm x 6m 
OX Pro Nylon High Vis Builders Line 105m / 350ft - Cyan 
Freeflow Round 112mm Gutter System 135° - White 
OX Pro Tough Bucket, Blue - 15 Litre 
Bond It Rubber Bitumen Emulsion - Black 5L 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Brown (Box of 5) 
Everbuild Lumberjack 5 Minute Wood Adhesive Deal 
Code 8 Cast Lead - 360mm x 3m 
Bora Workhorse Single Piece Stand with Folding Legs PM-3350 
Hambleside Danelaw Double Roman Tile Vent, TV15/3 - Black (Box of 5) 
OB41 Multi-Use Penetrating Oil Spray - 400ml 
Gorilla Tape - Black (48mm x 11m) 
Ronseal Anti-Condensation Paint - Matt White 750ml 
Soudal Trade Roof & Insulation Foam Genius - 600ml 
Everbuild Everflex Pyro Mate Fire Rated Silicone – White 295ml 
FloPlast Universal Hopper, White – 65-68mm 
Klober Regent Tile Vent KG6084, Dark Brown 
ALM Code 4 Milled Lead - 800mm x 3m 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, White - 300ml (Box of 12) 
Samac Silicone Bronze Nails - 1kg (31mm x 1.8mm) 
FloPlast Half Round Fascia Bracket, Black – 112mm 
FloPlast Universal Hopper, Black – 65-68mm 
Everbuild KOS Fire Cement Buff – 500g 
Uses
The Lumberjack 30 Min PU Wood Adhesive by Everbuild offers outstanding bonding to common building surfaces and wood. Everbuild's technicians formulated this product to deliver a 30-minute curing time, allowing faster application, perfect for line manufacturing. Other manufacturing areas this is perfect for include manufacturing doors and windows, furniture and the construction of staircases and ladders.
Preparation
You should prepare the surface before starting the application, removing any contaminants on the surface, such as dirt, dust, oil, grease, etc. You need at least one surface to be porous; non-porous surfaces should be abraded to provide a key for the adhesive. You can further enhance the adhesion by slightly moistening one surface with a damp cloth; do not over-wet.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and fit it into a standard sealant gun/applicator.
- Using a firm pressure on the handle, apply the adhesive to one surface, and after applying it, bring the two surfaces together immediately.
Limitations
- One surface must be porous for successful bonding
- Not suitable for polyethylene, polypropylene, Teflon or Nylon.
- Surfaces must be damp, but the moisture content of wood must not exceed 30% w/w
- Only apply this product between the temperature of 5°C to 30°C
- Setting times will be increased at low temperatures and low humidity.
