ALM Code 8 Milled Lead - 300mm x 3m 
Bond It The Beast PU Adhesive - Brown 500ml 
FloPlast Square Line Running Outlet Black – 114mm x 65mm 
Ronseal Super Flexible Smooth Finish Filler - 330g 
Cromar ProRidge Universal Ridge System - 6m Kit 
Code 6 Cast Lead - 390mm x 6m 
Ronseal Ultra Tough Satincoat Clear Varnish - 2.5L 
Everbuild Black Jack 901 Black Bitumen Paint – 1 Litre 
Timco 30mm Cladding Pin - 250 Pieces 
Everbuild Ultra Hard Floor Varnish – Clear 2.5 Litre (Gloss) 
Azpects EASYSeal Sandstone Enhancer and Sealer 5L 
Code 4 Cast Lead - 1200mm x 6m 
Bond It Rubber Bitumen Emulsion - Black 25L 
Everbuild Pinkgrip Adhesive Solvent Based – 350ml 
ALM Code 5 Milled Lead - 914mm x 3m 
OX Tools Pro Heavy Duty Flexi Tub - 73L 
Code 5 Cast Lead - 510mm x 6m 
Klober Profile-Line Twin Plain Tile Vent - Terracotta KG9861-0152 (Box of 10) 
Colron Liquid Scratch Cover - Medium 14ml 
Permavent Plain Easy - Box of 20 
Bond It Trowel Mastic - Black 1L 
Pro Magnetic Combination Square - 300mm 
Bond It Trowel Mastic - Black 2.5L 
Cromar Bitumen Trowel Mastic - Black 1L 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Black (Box of 5) 
Bond It Bitumen Primer - Black 25L 
Samac Aluminium Clout Nails - 50mm x 3.35mm 10kg Box 
Everbuild Stick2 Industrial Superglue GP - Transparent 20g (Box of 20) 
Soudal Fix ALL Turbo - White 290ml 
Everbuild Smart Tack Handy – 500ml 
Uses
The Lumberjack 30 Min PU Wood Adhesive by Everbuild offers outstanding bonding to common building surfaces and wood. Everbuild's technicians formulated this product to deliver a 30-minute curing time, allowing faster application, perfect for line manufacturing. Other manufacturing areas this is perfect for include manufacturing doors and windows, furniture and the construction of staircases and ladders.
Preparation
You should prepare the surface before starting the application, removing any contaminants on the surface, such as dirt, dust, oil, grease, etc. You need at least one surface to be porous; non-porous surfaces should be abraded to provide a key for the adhesive. You can further enhance the adhesion by slightly moistening one surface with a damp cloth; do not over-wet.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and fit it into a standard sealant gun/applicator.
- Using a firm pressure on the handle, apply the adhesive to one surface, and after applying it, bring the two surfaces together immediately.
Limitations
- One surface must be porous for successful bonding
- Not suitable for polyethylene, polypropylene, Teflon or Nylon.
- Surfaces must be damp, but the moisture content of wood must not exceed 30% w/w
- Only apply this product between the temperature of 5°C to 30°C
- Setting times will be increased at low temperatures and low humidity.
