OX Pro Heavy Duty Aviation Snips Straight Cut (Yellow) 
ALM Code 3 Milled Lead - 360mm x 6m 
ALM Code 4 Milled Lead - 300mm x 6m 
Soudal Pro 30D Waterproof Wood Adhesive - 750g 
Code 8 Cast Lead - 240mm x 3m 
OX Pro Tough Bucket, Blue - 15 Litre 
Timco M5 Form A Washer DIN 125 - 50 Pieces 
Soudal Pro 45P Superfast Wood Glue - 750g 
Easy-Trim Hip Support Tray Accessory Kit 
Everbuild Black Jack 902 Bitumen & Flashing Primer – 5 Litre 
Everbuild Showerproof Bathroom Silicone - Clear 280ml 
Timco Timber Frame Screw - Wafer Green (6.7 x 60) Box of 50 
Code 5 Cast Lead - 914mm x 6m 
Chesterfelt Polyester Reinforced Shed Roofing Felt - Green 10m x 1m 
Everbuild KOS Fire Cement Buff – 2kg 
ALM Code 7 Milled Lead - 850mm x 3m 
Ronseal One Coat Stays White Radiator Paint - Satin 250ml 
Circular Soffit Vent, Black 
Timloc Eaves Comb Filler 1m 
ALM Code 6 Milled Lead Flashing - 850mm x 6m 
Soudal Aquafix All Weather Sealant – Clear 300ml (Box of 12) 
Klober Profile-Line Flat Tile Vent - Antique Red KG9856-3-0116 (Box of 10) 
Ronseal Stays White 2in1 Paint & Primer - Matt 750ml 
Everbuild Filler Coat – White 5 Litre 
Uses
The Lumberjack 30 Min PU Wood Adhesive by Everbuild offers outstanding bonding to common building surfaces and wood. Everbuild's technicians formulated this product to deliver a 30-minute curing time, allowing faster application, perfect for line manufacturing. Other manufacturing areas this is perfect for include manufacturing doors and windows, furniture and the construction of staircases and ladders.
Preparation
You should prepare the surface before starting the application, removing any contaminants on the surface, such as dirt, dust, oil, grease, etc. You need at least one surface to be porous; non-porous surfaces should be abraded to provide a key for the adhesive. You can further enhance the adhesion by slightly moistening one surface with a damp cloth; do not over-wet.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and fit it into a standard sealant gun/applicator.
- Using a firm pressure on the handle, apply the adhesive to one surface, and after applying it, bring the two surfaces together immediately.
Limitations
- One surface must be porous for successful bonding
- Not suitable for polyethylene, polypropylene, Teflon or Nylon.
- Surfaces must be damp, but the moisture content of wood must not exceed 30% w/w
- Only apply this product between the temperature of 5°C to 30°C
- Setting times will be increased at low temperatures and low humidity.
