Soudal Grab Solvent Based Adhesive, Beige 
Cromar Cromaprufe - Black 5 Litre 
Bond It Aluminium Foil Tape - 50mm x 45M (Box of 24) 
Bond It Cyanoacrylate Superglue Hi Viscosity - Clear 20g 
Everbuild P18 Gas Leak Detector - 400ml 
Ronseal Garden Furniture Restorer - 1L 
OB41 High Performance Carburettor Cleaner - 400ml 
Bond It Felt Adhesive - Black 2.5L 
ALM Code 3 Milled Lead - 1000mm x 3m 
FloPlast Half Shed Round Miniflo Water Butt Guttering Pack, Black - 14 Pieces 
OX Tools Pro Combination Square 300mm / 12in 
Ronseal Diamond Hard Doorstep Paint - Black Satin 250ml 
Soudal Gap Filler Expanding Foam Gun Grade - 750ml 
Code 3 Cast Lead - 360mm x 6m 
Code 7 Cast Lead - 390mm x 6m 
OX TOOLTREK Modular Storage System - 3 Piece 
Everbuild Constructa-Pro Adhesive Foam - Grey 750ml 
Soudal Grip ALL Solvent-Free - White 290ml (Box of 12) 
FloPlast Square Fascia Bracket Black – 114mm 
Timco Copper Disc Rivets 
Bond It Dec-Mate Flexible Filler - White EU3 
Uses
The Lumberjack 30 Min PU Wood Adhesive by Everbuild offers outstanding bonding to common building surfaces and wood. Everbuild's technicians formulated this product to deliver a 30-minute curing time, allowing faster application, perfect for line manufacturing. Other manufacturing areas this is perfect for include manufacturing doors and windows, furniture and the construction of staircases and ladders.
Preparation
You should prepare the surface before starting the application, removing any contaminants on the surface, such as dirt, dust, oil, grease, etc. You need at least one surface to be porous; non-porous surfaces should be abraded to provide a key for the adhesive. You can further enhance the adhesion by slightly moistening one surface with a damp cloth; do not over-wet.
Application
- Remove the cap, cut the spout and apply to the surface
- You should apply it evenly to one surface, and once applied, bring surfaces together immediately.
Limitations
- One surface must be porous for successful bonding
- Not suitable for polyethylene, polypropylene, Teflon or Nylon.
- Surfaces must be damp, but the moisture content of wood must not exceed 30% w/w
- Only apply this product between the temperature of 5°C to 30°C
- Setting times will be increased at low temperatures and low humidity.
