Timco Skeleton Gun 
Everbuild Griptite Construction Adhesive - 350ml 
Ronseal Exterior Yacht Varnish - Satin 500ml 
Timloc Non-Profile Tile Vent Grey (Box of 8) 
Klober Profile-Line Limarech Tile Vent - Antique Red KG9859-3-0116 (Box of 10) 
Easy-Trim Lead R Flashing Textured – 300mm x 5m 
ALM Code 4 Milled Lead - 390mm x 6m 
Everbuild P13 Plumbers Putty - Beige 750g 
Everbuild KOS Fire Cement Buff – 500g 
Siroflex Painters Caulk-It - 310ml 
Timco Flat Wood Bit 1/4" Extension Rod - 300mm 
Everbuild Mammoth Clear Weatherproof Tape 
Soudal Soudafoam Gap Filler Hand Held 750ml 
Azpects EASYSeal Sandstone Enhancer and Sealer 5L 
Everbuild Lumberjack 30 Minute Polyurethane Wood Adhesive Gel – 310ml 
OX Trade Metric Tape Measure - 8m 
Bond It Monster Scrim Drywall Tape - White 48mm x 90m 
Hambleside Danelaw (HD DPCA) Tile Vent Adaptor for TV10 Range 
Ronseal Interior Varnish - Clear Satin 2.5L 
Bond It Cove-Mate Coving Adhesive - White EU3 
Soudal Construction Silicone, Clear - 290ml 
Everbuild KOS Black Fire Cement - 500g 
OX Tools Pro Carpenters Square & Angle Finder 300mm / 12in 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Black (Box of 5) 
Ronseal Ultra Tough Satincoat Clear Varnish - 5L 
Ronseal Expanding Foam Filler - 500ml 
Ronseal Ultra Tough Mattcoat Clear Varnish - 750ml 
Code 4 Cast Lead - 510mm x 3m 
Everbuild KOS Fire Cement Buff – 2kg 
Uses
The Lumberjack 5 Min PU Wood Adhesive by Everbuild offers outstanding bonding to common building surfaces and wood. Everbuild's technicians formulated this product to deliver a 5-minute curing time, allowing faster application, perfect for line manufacturing. Other manufacturing areas this is perfect for include manufacturing doors and windows, furniture and the construction of staircases and ladders.
Preparation
You should prepare the surface before starting the application, removing any contaminants on the surface, such as dirt, dust, oil, grease, etc. You need at least one surface to be porous; non-porous surfaces should be abraded to provide a key for the adhesive. You can further enhance the adhesion by slightly moistening one surface with a damp cloth; do not over-wet.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and fit it into a standard sealant gun/applicator.
- Using a firm pressure on the handle, apply the adhesive to one surface, and after applying it, bring the two surfaces together immediately.
Limitations
- One surface must be porous for successful bonding
- Not suitable for polyethylene, polypropylene, Teflon or Nylon.
- Surfaces must be damp, but the moisture content of wood must not exceed 30% w/w
- Only apply this product between the temperature of 5°C to 30°C
- Setting times will be increased at low temperatures and low humidity.
