Timco Lithium EP2 Grease - 400g 
Bond It All Weather Roofing Compound - Black 2.5L 
Everbuild General Purpose Silicone - Grey 280ml (Box of 12) 
Everbuild Black Jack 908 DPM – 25 Litre 
Timco Nut Mix Grab Pack - 980 Pieces 
Code 3 Cast Lead - 1000mm x 3m 
Hambleside Danelaw TV15/7 Tile Vent - Terracotta (Box of 5) 
Restec GRPROOF 1010 Base Coat Resin - 20kg 
Bond It All Weather Roofing Compound - Black 25L 
Ox Tools Waterproof Latex Gloves Size 9 Large 
Code 8 Cast Lead - 180mm x 3m 
FloPlast Square Line Pipe Connector Black 
Timco Professional Wire Strippers 
Sika Water Seal & Waterproof Protector - 5 Litre 
Code 7 Cast Lead - 450mm x 3m 
Cromar Bitumen Primer – Black 5 Litre 
Everbuild Everflex Lead Mate Sealant Grey - 295 ml 
Uses
The Salt-Away by Everbuild is a unique, high-quality formula that combats unsightly marks left when salt evaporates from surfaces, leaving white marks and efflorescence. It's formulated using a special, non-hydrochloric acid, which is safer to handle and for organic life.
Issues that can occur if you leave this untreated can lead to corrosive damage and structural damage to some surfaces.
Preparation
Use a stiff brush to wipe the surface, removing any surface dirt or debris.
Application
- Dampen the surface you intend to apply this to
- Apply the Salt-Away to the surface, ensuring that you apply thorough, even coverage.
- Allow it to sit on the surface for 5-10 minutes, depending on levels of efflorescence.
- Wash the surface down thoroughly using clean water
- If the efflorescence is still present, repeat the application
Limitations
- Always test in a small, inconspicuous area to ensure surface compatibility.
- Do not use on artificially coloured stone, pavers or blocks.
- Any accidents, spillages or oversprays must be washed off immediately using clean water.
