Soudal Pro 40P PU Wood Adhesive - 750g 
Everbuild Firefoam B1 Gun Grade Expanding Foam - Pink 750ml (Box of 12) 
ALM Code 3 Milled Lead - 850mm x 3m 
201 Mortar Admix – 5 Litre 
Bond It Squeezy Door and Frame Sealant - EU2 White 
Cromar Bitumen Trowel Mastic - Black 2.5L 
Everbuild P14 System Inhibitor – 1 Litre 
OX Pro Brick Carrier 
FloPlast Square to Round Downpipe Adaptor - Brown 
Timco 6pcs Stubby Screwdriver Assorted Set 
Timco Screwdriver 8-Tool Set 
Easy-Trim Lead R Flashing Smooth – 600mm x 5m 
ALM Code 7 Milled Lead - 1000mm x 3m 
FloPlast Half Round Downpipe 112° Bend, Brown 
Cromar Protect 1F Non-Breathable Roofing Felt – 1m x 45m 
ALM Code 8 Milled Lead - 600mm x 6m 
Everbuild Caulk Once – White 295ml 
Bond It Saves Nails Instant Grab Adhesive - EU3 Beige 
Code 7 Cast Lead - 360mm x 3m 
Hedgehog Gutterbrush Clips (Pack of 20) 
Cromar Bitumen Trowel Mastic - Black 1L 
Everbuild Mitre Fast Industrial Kit Superglue & Activator 
Everbuild Forever Clear Silicone Sealant – 295ml 
Uses
The Silicone Eater by Everbuild is an exceptionally powerful and handy product for removing old silicone-based sealants. This product is formulated using robust polymers that combat the silicone composite, deconstructing them and allowing easily water-based clean-up to remove them entirely. This product is suitable for various surfaces, with some proving more compatible than others, so a preliminary test is always recommended.
Preparation
Start by cleaning the surfaces, removing any impurities that can hinder this product's abilities, which include dust. After removing contaminants, strip and remove as much sealant as possible and then protect surrounding areas with impervious masking tape.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and screw it onto the cartridge.
- Place the cartridge into a compatible sealant applicator tool.
- Extrude the material onto the sealant, allowing 2-4 hours for it to de-bond it.
- Four hours is the maximum it can sit on the sealant, so at the 4-hour mark, wipe it all away; if there is a left-over sealant, apply it again.
Limitation and Notes
- Complete a preliminary compatibility test before commencing the full application
- This product has a powerful composite, which can harm sensitive surfaces.
