Everbuild General Purpose Silicone - Clear 280ml (Box of 12) 
Everbuild Stainblock - White 400ml 
Code 6 Cast Lead - 300mm x 3m 
ALM Code 3 Milled Lead - 450mm x 6m 
Code 5 Cast Lead - 510mm x 6m 
Roughneck® V-Series Axe - 20oz/0.6kg 
FloPlast Half Round Gutter Union, White 
Klober Double Pantile Vent - Brown KG9858-3-0247 (Box of 10) 
Armatool Flooring Kneepads 
FloPlast Round Line Downpipe Clip, Brown 
ALM Code 8 Milled Lead - 450mm x 6m 
Everflex Premium+ 450 Builders Silicone – Grey 300ml (Box of 25) 
Everbuild Patio Wizard – 1 Litre 
Timloc Telescopic Underfloor Vent 5-7 Courses 
Bond It PVA & Adhesive Sealer White 500ml - Box of 20 
ALM Code 6 Milled Lead Flashing - 800mm x 6m 
OX Tools Pro Torpedo Level, 9" / 230mm 
Everbuild Pinkgrip Adhesive Solvent Based – 350ml 
Soudal Acetoxy Stay Fresh Sanitary Silicone Sealant – Ice White 290ml 
Easy-Trim Universal Dry Verge Unit - Black 
Cromar Bitumen Trowel Mastic - Black 1L 
Code 7 Cast Lead - 390mm x 6m 
Everbuild Everflex Heat Mate Sealant - Red 295ml 
Everbuild Professional Sealant Gun - C3 (280ml - 310ml) 
Ronseal One Coat All Surface Primer and Undercoat - White 750ml 
Soudal Construction Silicone, Grey - 290ml (Box of 12) 
Hambleside Danelaw TV15/4 Tile Vent - Terracotta (Box of 5) 
Everbuild Stick2 Industrial Superglue GP - Transparent 20g (Box of 20) 
Uses
The Silicone Eater by Everbuild is an exceptionally powerful and handy product for removing old silicone-based sealants. This product is formulated using robust polymers that combat the silicone composite, deconstructing them and allowing easily water-based clean-up to remove them entirely. This product is suitable for various surfaces, with some proving more compatible than others, so a preliminary test is always recommended.
Preparation
Start by cleaning the surfaces, removing any impurities that can hinder this product's abilities, which include dust. After removing contaminants, strip and remove as much sealant as possible and then protect surrounding areas with impervious masking tape.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and screw it onto the cartridge.
- Place the cartridge into a compatible sealant applicator tool.
- Extrude the material onto the sealant, allowing 2-4 hours for it to de-bond it.
- Four hours is the maximum it can sit on the sealant, so at the 4-hour mark, wipe it all away; if there is a left-over sealant, apply it again.
Limitation and Notes
- Complete a preliminary compatibility test before commencing the full application
- This product has a powerful composite, which can harm sensitive surfaces.
