Bond It Stain Block - 400ml Off White 
Code 3 Cast Lead - 760mm x 6m 
EVO-STIK Sticks Like All Weather Adhesive - Clear 290ml 
ALM Code 7 Milled Lead - 1600mm x 6m 
ALM Code 5 Milled Lead - 210mm x 6m 
OX Pro Tuff 3 Level Kit - 600, 1200 and 1800mm 
Bond It No Crack Caulk - White 310ml 
ALM Code 6 Milled Lead Flashing - 180mm x 6m 
Code 8 Cast Lead - 510mm x 6m 
OX Tools OXIT Sealant & Adhesive - Anthracite 290ml (Box of 12) 
Soudal Genius Gun Gap Filling Foam - 750ml 
Timco Screwdriver 6-Tool Set 
Timloc Double Pantile Tile Vent Brown (Box of 6) 
Siroflex Painters Caulk-It - 310ml 
Permavent Black Breather Membrane – 1m x 50m 
Code 4 Cast Lead - 1000mm x 6m 
Everbuild Mitre Fast Industrial Kit Superglue (Box of 24) 
OX Trade Tile Cleaner 120 x 250mm 
Siroflex Trade Strength Glue Screws SF Adhesive 
Everflex Premium+ 450 Builders Silicone – Oak 300ml (Box of 25) 
Code 7 Cast Lead - 300mm x 3m 
Bond It Decking Oil - Natural 2.5L 
Ulti-Mate 110/110mm Flexipipe 
Bond It Heavy Duty Gun Foam Applicator 
Everbuild EB25 Ultimate Sealant & Adhesive – Anthracite 300ml (Box of 12) 
Everbuild Stick2 Rapid Epoxy Tube (2 x 12ml) 
Uses
The Everbuild Stick2 Carpet Fix Spray is a high-quality adhesive spray with a high tack, making it perfect for bonding carpets and various other substrates. Everbuild delivers this product in a spray can, allowing easy and faster application. Suitable for not only bonding carpets but multiple other surfaces, including;
- Polyurethane
- Foam back carpets
- Carpet tiles
- Underlay
- Paper felt
- Cork
- Rubber
- Metal
- Leather
- Most plastics
Preparation
It's essential to prepare the surface before application to achieve optimal results. First, clean the surface by removing contaminants that can hinder the adhesion, including dirt, dust, oil, grease, etc. Leaving all substrates bonded in a warm area to heat up slightly is recommended, preventing longer curing times and glue lines.
Application
- Shake the can thoroughly before using it.
- You can adjust the nozzle to change the width of the spray to your desire
- Apply to both surfaces from about 15-20 cm away, then bring together.
- For a stronger bond, you can coat the substrates three times in one application and allow the solvents to evaporate, which takes 30 seconds, then bring the surfaces together.
Limitations
- This product is not suitable for fixing vinyl floor tiles
- Do not apply to polystyrene
- This should not be applied to cellulose-painted surfaces
- Do not apply to surfaces that leak bitumen or tar
