Soudafoam Gap Filler Gun Grade – 750ml 
Bond It Rubber Bitumen Emulsion - Black 5L 
Bond It Bitumen Primer - Black 1L 
Everbuild Anchorset Green 300 - Grey 300ml (Box of 12) 
Soudafoam Window & Door Hand Held - 750ml 
Soudal Trade All Weather Sealant - Clear 290ml 
ALM Code 6 Milled Lead Flashing - 450mm x 6m 
Timco Timber Frame Screw - Wafer Green (6.7 x 60) Box of 50 
Everbuild Everflex Fire Mate Intumescent Sealant – 295ml (Box of 25) 
OX Trade Plastic Speed Rafters Square Set 
Klober Flexipipe 75/100mm - (KG972400) 
Everbuild Pinkgrip Adhesive Solvent Based – 350ml 
Roughneck® V-Series Axe - 20oz/0.6kg 
ALM Code 7 Milled Lead - 1200mm x 6m 
Siroflex Trade Acrylic Decorators Caulk - 300ml 
Code 4 Cast Lead - 914mm x 3m 
Soudal Trade Gun and Foam Cleaner - 500ml 
Timco Collated Drywall Self Drilling Screws 
Sikagard Woodworm Killer - 5 Litre 
ALM Code 8 Milled Lead - 1000mm x 3m 
Ronseal Diamond Hard Floor Wax - Natural 2.5L 
OX Pro Moulding Bar - 10" / 250mm 
Soudal Genius Gun Gap Filler Expanding Foam - 600ml (Box of 12) 
ALM Code 4 Milled Lead - 180mm x 6m 
Ronseal Super Flexible Smooth Finish Filler - 330g 
Uses
The Stick2 Superglue GP by Everbuild is ideal for perfectly fitting surfaces that need to be bonded, with its curing time of only 10-15 seconds. It offers small but effective gap-filling properties suitable for up to 0.1mm and is a convenient single-component adhesive. It's an environmentally friendly alternative glue, and this is due to its economical usage alongside its solvent-free composite. Surfaces that this product is excellent for bonding include;
- Plastics
- Metals
- PVCu
- EPDM
Preparation
Surfaces to be bonded must be cleaned, dry and free from contaminants that can hinder the adhesion, such as dirt, dust, oil, grease, etc. To avoid chilling glue lines, store surfaces in a warm environment before bonding, and when commencing the application, ensure there's a relative humidity of 50%+
Application
Unscrew the cap of the product
Squeeze the product to one surface only
Press the surface and hold them together for at least 10 seconds, taking care with the aligning as the open time is short.
Limitations and Notes
- This product should be used in applications that are constantly immersed in water.
- Ensure the surfaces are degreased before bonding
- Ensure surfaces are close fitting as it doesn't bridge gaps
- Do not use on surfaces or products that are bitumen or tar-leaching
