ALM Code 3 Milled Lead - 510mm x 3m 
Soudal Trade Gun and Foam Cleaner - 500ml 
Everbuild Lumberjack 550 Floor Adhesive – 600ml (Box of 12) 
Resiblock Indian Sandstone Sealer Invisible - 5 Litre 
Everbuild Lumberjack 30 Minute PU Wood Adhesive Gel - 310ml (Box of 12) 
Everbuild Everflex 115 G.P Building Mastic - Stone 285ml (Box of 25) 
Hambleside Danelaw TV15/4 Tile Vent - Brown (Box of 5) 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Black - 300ml (Box of 12) 
ALM Code 5 Milled Lead - 510mm x 3m 
Everbuild B1 Hand Held Expanding Fire Rated Foam - Pink 750 ml 
ALM Code 4 Milled Lead - 850mm x 3m 
ALM Code 8 Milled Lead - 300mm x 6m 
SikaMur InjectoCream-100 - White 300ml 
Code 3 Cast Lead - 360mm x 6m 
Everbuild 701 Non-Slip Tile Adhesive – White 3.75kg 
Code 7 Cast Lead - 600mm x 3m 
Soudal Construction Silicone, Grey - 290ml 
Code 5 Cast Lead - 1000mm x 3m 
FloPlast Half Round Running Outlet, White 
Everbuild Pinkgrip SF But It’s White – 380ml 
Uses
The Stick2 Superglue GP by Everbuild is ideal for perfectly fitting surfaces that need to be bonded, with its curing time of only 10-15 seconds. It offers small but effective gap-filling properties suitable for up to 0.1mm and is a convenient single-component adhesive. It's an environmentally friendly alternative glue, and this is due to its economical usage alongside its solvent-free composite. Surfaces that this product is excellent for bonding include;
- Plastics
- Metals
- PVCu
- EPDM
Preparation
Surfaces to be bonded must be cleaned, dry and free from contaminants that can hinder the adhesion, such as dirt, dust, oil, grease, etc. To avoid chilling glue lines, store surfaces in a warm environment before bonding, and when commencing the application, ensure there's a relative humidity of 50%+
Application
- Unscrew the cap of the product
- Squeeze the product to one surface only
- Press the surface and hold them together for at least 10 seconds, taking care with the aligning as the open time is short.
Limitations and Notes
- This product should be used in applications that are constantly immersed in water.
- Ensure the surfaces are degreased before bonding
- Ensure surfaces are close fitting as it doesn't bridge gaps
- Do not use on surfaces or products that are bitumen or tar-leaching
